Motor

FANUC A06B-1453-B200

Condition: used, Year of construction: 2006, power capacity max 22 kW volt / V Bledpfx Apempb Inereh ampere / A

Year of construction: 2022, condition: used, Used machine Year of manufacture: 2022 Condition: as new, only a few operating hours, not used in production Equipment and technical specifications: Bjdjxdplbjpfx Aprelh - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigeration dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2" - Tank capacity: 270 litres (AD2000) - Frequency controlled - Electronic control - Oil heat exchanger - Compressed air tank galvanized inside and outside - Drive transmission: Direct coupling - Switching: Star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: on request Location: Bavaria

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways Bodpfxsnq Sanj Aprslh - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg Blsdsx I Izrepfx Aprsh

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Bljdpfjwn Dy Dox Aprjh Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, column diameter: 105 mm, injection pressure: 1,555 bar, mold height (min.): 350 mm, ejector force: 59 N, ejector stroke: 200 mm, opening stroke: 800 mm, heating capacity: 31.3 kW (42.56 HP), Equipment: USB port, documentation/manual, OPPORTUNITY Press ready for use, in very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for the mold with 12 zones included. All details are visible in the photos. Bedeww D Rnjpfx Aprelh

Condition: used, pressure 80.0 t Bljdpfxsxabi Ro Aprsh punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Year of construction: 2012, condition: good (used), Motor grinding spindle, grinding spindle, high-performance grinding spindle, spindle head Bedjkyy T Nspfx Aprolh -Manufacturer: Santenberg, spindle head from CNC machining center GTC S 2 -Hydraulic Tensioner: : Kitagawa SS1246K / S1246 -Dimensions: see photos -Number: 2x spindle head available -Price per piece -Dimensions: 830/390/H260mm / 840/350/H280mm -Weight: 110kg / 115kg

Condition: ready for operation (used), Fanuc A06B-6110-H030 Servo Amplifier Module Version: C SN:V02472718, used, normal signs of use, 100% functional, scope of delivery as per photos Bjdpfxerrbahe Aprolh