TUR 630 x 2000-3000

FAT

Condition: ready for operation (used), Year of construction: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Yom: 2010 Turning diameter: 630 mm Turning diameter over top slide: 370 mm Turning length: 2,000 mm Ijdpfxew Ecuue Adwetb

Condition: new, Year of construction: 2024, functionality: fully functional, Drive spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6" Itedpfx Asup Slbjdwjb Working area Center distance: 1,500 mm Center height: 290 mm Diameter over bed: 570 mm Diameter over slide: 510 mm Tool system Turret: PARAT 4-station turret head RD 3 Tailstock Technology: Manual Center: MK-4 (flying) Equipment Chip management: Chip tray Coolant supply: Coolant pump 7 bar

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, spindle bore: 140 mm, turning length: 3,000 mm, turning diameter: 630 mm, center width: 3,000 mm, turning diameter over bed slide: 380 mm, Universal lathe machine after general overhaul. Itedpfx Adsd Eafdswjb

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 2,000 mm, total length: 3,900 mm, total width: 1,420 mm, total height: 1,590 mm, overall weight: 3,400 kg, workpiece weight (max.): 1,500 kg, The universal lathe FAT TUR 630M/2M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical specifications: - distance between centers/turning length: 2000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: Isdpfx Aod Ead Todwjtb total length: 3900 mm width: 1420 mm height: 1500 mm total weight: 3400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 Itsdpfx Asiypz Esdwjb - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: Iedpjd Eaa Eefx Adwetb - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3600 mm Measurements height 1900 mm Itedpfx Adox D Spijwob Machine weight 6600 kg Control Unit Brand SIEMENS Model 840 D SL Main Drive Spindle speed range 5000 rpm Spindle motor power 57 kW Number of axis 3 Turret Number of turrets 1 Tools Type of tool holder VDI 30 Additional Equipment Parts catcher for main counter spindle This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol Iodpfx Ajuxfucedwjtb -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: excellent (used), Year of construction: 2010, Swing over bed 710 mm Center height 350 mm Distance between centers 3000 mm C-axis +/- 0.05° Spindle speeds 2-1850 rpm Isdpsx A Exbefx Adwotb Control: SIEMENS 840D Shop Turn Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Itodpfx Adsxxm A Hewob Tool holder Steadies Live centre

Condition: new, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven Ijdpfegg N Amex Adwotb - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. FUM Poreba FAT Wrocław AVIA Warszawa Jafo Jarocin ZM Tarnow Tarnow DEFUM Dabrowa Gornicza FAMOT Pleszew Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Ijdpfx Ajum Ixxsdwotb Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 040531, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, turning diameter: 630 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 18,500 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, total height: 1,756 mm, total length: 3,700 mm, feed length X-axis: 350 mm, feed rate Z-axis: 3,200 m/min, type of input current: three-phase, torque: 2,100 Nm, overall weight: 4,800 kg, bar diameter (max.): 105 mm, Equipment: documentation/manual, rotational speed infinitely variable, - Sauter disk-type tool turret VDI40 - Approximately 40 tool holders included, but no tools Ijdpfxexwckws Adwstb - Supplied with compressed air package and jaws - Chip conveyor included - Manuals

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Itodpfx Adewga Eyowjb Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Condition: new, Year of construction: 2025, operating hours: 100 h, machine/vehicle number: BMWF241003, We are pleased to present a unique offer for a numerically controlled lathe. The offered lathe is the FAT TUR 630MN x 2000 model, manufactured in 2001, which underwent a complete overhaul in 2024. The lathe is equipped with a new SIEMENS 828D control system. Its user-friendly programming environment, along with process simulation capabilities and built-in documentation, allows for a significant reduction in the time required to introduce a new part into production. As a result, we offer a machine tool with all the attributes of modern CNC machines at an attractive price. At the same time, we provide extensive customer support, including machine commissioning and implementation, warranty and post-warranty service, training in programming and machine operation, as well as assistance in implementing technology and parts production. Main Features of the TUR MN Lathe: • European Standard – the lathe is built with the highest quality components. • Rigid and wide bed – ensures high rigidity, resulting in excellent surface finish quality. • Hardened and ground components – the bed and gears are hardened and ground for increased durability. • Precision ball screws – guarantee high machining accuracy. • Spindle head – two-stage, up to 2500 RPM, with high torque for precise and heavy-duty machining. • Control system – new Siemens 828D controller. • Enclosed work area – ensures safety and operator comfort. Machine Operating Modes: • Manual Mode (JOG) – used mainly for machine setup, tool measurement, workpiece preparation, process planning, and simple turning operations. • Semi-automatic Mode (MDI) – allows execution of G-code command sequences via the command line. • Automatic Mode (Auto) – fully automated operation based on a generated G-code program, using machining cycles and/or contour drawings with specified part and machining parameters. Key Features of the Operator Interface: • User-friendly and intuitive control system with built-in documentation. • File saving and retrieval via USB port. • Graphical machining simulation before and during the turning process. • Contour turning – the ability to draw part shapes on the control panel using basic geometric elements (lines, curves, arcs) and calculate undefined steps. • Machining using cycles, contours, and/or G-code in a single program, with the ability to create subprograms. • Execution of programs compliant with ISO/DIN coding standards. Scope of the Overhaul: • Bed grinding. • Restoration of slides and carriage (new sliding coatings). • Machine geometry adjustment (scraping). • Replacement of all bearings (spindle head, X-axis, Z-axis, tailstock). • Replacement of X and Z-axis ball screws. • Replacement of the entire lubrication system. • Replacement of drive belts. • Installation of new X and Z-axis Siemens motors. • Installation of a new Siemens 828D control system. • Complete rewiring, including control cabinet components. • Tailstock inspection. • Machine repainting. • Replacement of worn mechanical components (gears in the spindle head). Itsdpfx Asv R Dlyedweb