Hand hydraulic pump 450 Bar

FH Frieseke & Hoepfner WKP 3

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Njdpfexy Ac Sjx Ah Tewk Travel X-axis: 1,110 mm Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Control: Fanuc 31i No Y-axis

Condition: used, Technical details: Njdpfx Aewix Hhjh Towk x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Nedpfed Hiwisx Ah Tewk Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm Nwjdpoyyc Svjfx Ah Tok max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t required space 5,00 x 3,20 x 3,00 m

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Njdpfx Ahex Enlro Tewk Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm Njdpjvxwx Aefx Ah Towk z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours- Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine- SK40 with internal cooling Nwedpey T Hbzjfx Ah Tsk Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: new, Hydraulic workshop press LFSS, type DPM 1070/150 Technical specifications: Pressure: 150 t Stroke: 300 mm Table area: 1070 x 290 mm Distance between column guides: 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Retraction speed: 10.0 mm/sec Njdpfxsgiphno Ah Tjwk Motor power: 11 kW Machine weight: approx. 1900 kg Space required: approx. 2110 x 1000 x 2340 mm Equipment: Hydraulic workshop press Table height adjustment V-block tool insert Pressure gauge

Condition: used, Year of construction: 2006, functionality: fully functional, Machine dimensions: 2.9m x 2.8m x 2.9m Machine weight: approx. 7 tons Year of manufacture: 2006 Travel ranges: X 1050 Y 530 Nwedsy Tlu Topfx Ah Tok Z 510 (150 above table) Spindle speed: max. 12,000 rpm Motor spindle: SK40 Measuring probe: Renishaw OMP 60 Measuring head: Mazak Internal cooling pressure: 25 bar External cooling Tool magazine: 30 positions Articulated belt conveyor Machine control: MAZATROL M640 • One machine each in left-hand and right-hand configuration (chip conveyor on the left or right) • Various tool holders can be purchased separately. • NO clamping devices (vices) included! • NO dust extraction system The stated price is for one machine only.

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Year: 1995 Chain: 3 meters Three-phase 380V Nodpeudv Tkofx Ah Tjwk Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw