Lift table

Flexlift FCE1000(4)

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Pjdpfsh A Sfdex Ab Isrd Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Pedpfekvnumsx Ab Isrd Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, roll diameter: 80 mm, total width: 1,250 mm, total length: 40,750 mm, conveying length: 40,750 mm, power: 1.1 kW (1.50 HP), roll spacing: 160 mm, axle spacing: 160 mm, frame height: 185 mm, frame width: 85 mm, Pallet roller conveyor/roller conveyor/pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive System consists of 9 segments 6 x approx. 5.75 meters long 1 x approx. 5.30 meters long 1 x approx. 2.00 meters long Pjdpotrv Anofx Ab Isrd 1 x approx. 0.95 meters long Each element is equipped with its own motor. Total length: approx. 40.75 meters Total width including motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveyor width: approx. 820 mm Roller diameter: approx. 80 mm Axles/axle spacing: approx. 160 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Color: Blue Includes pallet guide Includes SEW motor (1.1 kW) Includes feet (height-adjustable) The conveyor system was in operation until dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: good (used), Year of construction: 1985, functionality: fully functional, type of input current: three-phase, Lenght :10400mm/ piece Roller lenght: 1000 mm Roller diameter : 90 mm Space between rollers: 120mm Weight cca: 1800kg Stock: approx. 70m!! diferent sizes. Pedpfx Abodbacvo Ijrd

Condition: excellent (used), Year of construction: 1992, working width: 1,020 mm, sheet thickness steel (max.): 4 mm, stroke length: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Adjustment of bending beam 50 mm Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm Pjdpfx Abougum Io Ijrd All data without guarantee A demonstration is possible at any time in our showroom.

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Installation height: 32 mm - Built-in clinching tool - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Predpfxedz Sqqe Ab Ijd Comes from a production plant, sold without electrical control

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm TABLE DIMENSIONS: 2500x1400mm Psdpferfxhkox Ab Ijrd

Condition: excellent (used), Year of construction: 2018, Polar Stacker Lift LW 1000-4 Year of manufacture 2018 Platform 800 x 1260 mm Load capacity 1000 kg The automatic lifting of the material to be cut allows the operator to load the material into the automatic jogger or directly into the cutting machine at an ergonomically convenient working height. The stacker lift can also be used for stacking material to be cut. Stacker lifts do not need to be anchored to the floor and can therefore be easily relocated. They are equipped with continuously adjustable retro-reflective light barriers for automatic raising or lowering. The control panel can be easily mounted on the right or left. Predjwif Iropfx Ab Ied

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg Prodpfx Ael Nbqcob Ied good condition

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Prodehy N Uhopfx Ab Isd Auto impression Preloader Machine has been completely built by Starfoil. Condition as is.