Receiving belt

Forderband Transportband Conveyor

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm Duodps Syv Tofx Ag Rjl cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. Dujdpfxjua D Ale Ag Rol ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Dedpfxjmidtrj Ag Rsul Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: reconditioned (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! Duodpfxonh Rnue Ag Rjl We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres Duodpfx Agoq Nyw Ao Rsl The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Djdpjfv Awaofx Ag Roul spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Dsdpfencd Azex Ag Reul Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect Dusdowzzivspfx Ag Rjl

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!! Dujdov Hwk Ujpfx Ag Rol

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. Duedpev D A Imofx Ag Rol The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.