Band saw

GEORGE CY300N

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Todpfx Aoul Svlomksa Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut Tsdjxabpwspfx Amkea - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Plastic storage boxes / Euro containers 600 x 400 x 250 mm – approximately 20,000 units available Robust plastic storage boxes for warehousing, logistics, production, and shipping. Large quantities available. Ideal for automated storage technology, order picking, and internal transport. Manufacturer: Unknown Product type: Plastic storage box / Euro container Tjdozapqqjpfx Amkea Material: Plastic Color: Gray External dimensions: approximately 600 x 400 x 240 mm Stackable: Yes Design: Closed side walls Base design: Closed Condition: Used Available quantity: approximately 20,000 units The boxes are only sold in truckloads; delivery is only possible in 33-unit pallets (36 per pallet), meaning a minimum of 33 x 36 = 1188 units.

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Tjdpfezc Imisx Amksa Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm Tjdpfx Amexaarkekja capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Tjdpfx Aewwr Tqomksa Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Tsdpfx Amjyv I Easkea Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Tsdpjy Txb Tsfx Amksa

Condition: new, Year of construction: 2025, Equipment: documentation/manual, rotational speed infinitely variable, – Semi-automatic – Hydraulic – Infinitely adjustable speed 20/80 m/min – Double mitre – Saw pressure hydraulically adjustable – Cooling – Saw blade 3770 x 34 x 1.1 mm Todpfjyzuvcex Amkea – Emergency stop – Documentation – 400V