CNC lathe

Gildemeister CTX 400

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 01360000541, turning length: 600 mm, turning diameter: 320 mm, spindle bore: 87 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, quill diameter: 120 mm, quill stroke: 150 mm, overall weight: 5,000 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 4290, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, tailstock quill stroke: 580 mm, operating hours of spindle: 22,794 h, GILDEMEISTER CTX 400 C CNC turning machine - Swing diameter: 505 mm - Swing diameter over X-axis: 365 mm - Bar capacity: max. 65/75 mm - Spindle diameter in the front bearing: 130 mm - Chuck diameter: 200/250 mm - Drive power: 21 kW - incl. C-axis - Speed: 200 rpm - Positioning accuracy: 0.04° - Ball screw X/Z: 32 x 10 mm - Feed force X/Z: 4/6 kN - incl. 12-position tool changer - Number of driven tool stations: all 12 - Shank diameter: VDI 30 - Tool disk, axial tool mounting: pitch diameter: 340 mm - incl. tailstock, tailstock travel: 580 mm - Center height: MK 4 - incl. additional driven VDI 30 tool holders – compatible with the machine Pjdpo Afutdsfx Airjrc - with chip conveyor and documentation The machine is equipped with a tailstock, a 3-jaw chuck, diameter: 200 mm, and a 12-position tool turret, VDI 30. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm Pjdpfx Asy Amlljirsrc y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors! Prodps Afpmxjfx Airec

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Prjdpfx Ae Agwqtsirsc

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Prsdpfx Asx Tvkxoirec

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) Podpfx Aszcd Hlsirjrc - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: good (used), Year of construction: 1990, Maximum height 250 mm Turning length 640 mm Maximum turning diameter over the bed cover 500 mm Maximum turning diameter over the compound slide 290 mm Spindle head according to DIN Size 140 h5 Spindle bore 72 mm Speed range 25 – 5000 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse, longitudinal 15 m/min ditto, transverse 10 m/min Main drive 22 kW Dimensions with chip conveyor L x W x H 4527 x 1940 x 1730 mm Weight with chip conveyor 5140 kg Prodpfx Aioz I Ubmsroc This machine does not have a tailstock! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg Predpfx Aiexab R Uorjc range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: good (used), functionality: fully functional, it is equipped with a 210 spindle, but can accommodate up to 250. It does NOT have motorized tools. Heidenhain control system. Pjdpfxe Ad R Rcj Airorc

Condition: good (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, total height: 1,730 mm, total length: 4,530 mm, total width: 1,940 mm, overall weight: 5,200 kg, Gildemeister CTX 400, CNC turning machine. The machine is in good, well-maintained condition. Manual included. Machine with EPL2 programming. Travel distances: Z-axis = 640 mm X-axis = 212 mm Max. turning diameter over the bed: 500 mm Data: - Year of manufacture: 1993 - CNC control: EltroPilot L2 - 12 tool stations - Spindle power: 22 kW - Rapid traverse X-axis: 10 m/min - Rapid traverse Z-axis: 15 m/min - Speed range: 25 - 5000 rpm - Chip conveyor GB 25L 38L (discharge height 1100mm, belt width 225mm, feed height 250mm) - Double foot switch - Machine weight (with chip conveyor): approx. 5.15 tons - Dimensions with chip conveyor (W x D x H): 4.53 x 1.94 x 1.73 m The machine can be inspected at any time. The sale is only to business customers and is without guarantee or warranty. Pedpfj Ad H Uksx Airsrc You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: good (used), Year of construction: 2019, Universal machining center Machine type: Hedelius Acura 65 Control: Heidenhain TNC 640 Year: 2019 Available after: Dezember 2026 SPECIFICATIONS 5-axis-simultaneous X-Axis: 700 mm Y-Axis: 650 / 465 mm Z-Axis: 600 mm Rapid motion: (X/Y/Z): 40/40/40 m/min. B-Axes: +30° / -115° Spindle speeds: 12.000 rpm Spindle power: 22 kW Torque: 117 Nm Tool: SK 40 Tool capacity: 65 Prjdpfxjz D Aq Uo Airoc Table size: D: 650 x 540 mm mm Max. Table Load: 500 kg Equipment Chip conveyor 3D-Touch probe: M&H Internal cooling: 25 bar Cooling tank: 500 l Electronical handwheel: HR 510 Oil mist separator Chip rinsing pistol Kinematikset 3D-Formenbauabstimmung Documentation - German

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, number of axes: 3, This 3-axis Gildemeister CTX 400E was manufactured in 1998. It features an X-axis travel of 220 mm and a Z-axis travel of 635 mm. The machine is equipped with driven tools and a counter-spindle for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400E horizontal turning machine we have for sale. Contact us for further details. Technical Specification Prsdpfxoz D T H Tj Airsc Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2002, operating hours: 44,462 h, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of axes: 4, This 4-axis Gildemeister CTX -400 twin was manufactured in 2002. It features a robust turn-mill centre design, ideal for complex machining tasks. The machine is equipped with a chip conveyor system for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister CTX -400 twin turn-mill centre we have for sale. Contact us for further details. Podpfx Aisz D Trpsrorc - Machine Model: CTX -400 twin- Year of Manufacture: 2002- Voltage (U): 400 V- Phases: 3 ~- Frequency (f): 50 Hz- Apparent Power (P): 44 kVA- Rated Current (I): 64 A- Fuse Rating: 80 A- Control Voltage (AC): 230 V- Control Voltage (DC): 24 V=- Additional Accessories / Documentation: - Transport and Installation Guide - Software / System Disks (CTX 400 twin / CTX 400E V6, Microsoft Windows 98 Second Edition) - Daikin Oilcon Unit (Model: AKS35K-U63, 200V 50/60Hz, Comp: 250W, Pump: 200W, Refrigerant: R22 / 0.54 kg, Ref. Oil: SUNISO4GS-DI. / 0.4 L, Weight: 55 kg) - Chip Conveyor System Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm Prjdezc D Enopfx Airoc

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Pedjzgupkepfx Airjrc Very good condition, machine comes from a school Operating hours: 14,000