CNC turning and milling center

Gildemeister CTX BETA 1250 4A

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Tedpezkmqzofx Aahsc Additional equipment: HOMAG XES 200 service station.

Condition: used, Year of construction: 2018, Type Bestückungsanlage weight 120 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - Robojob Mill-Assist: - Raw part handling - Simple dialog control - Very easy to use - Raw parts can be stacked on the table - Pallet storage - Parts cleaning Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Tsdpfx Aexq R E Ajahoc prior sale!

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Tjdpfx Aszkvkqjahoc

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm Todpfxow E Nnbj Aahsc bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Tsdpfxjx Tvkxe Aahjc

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight: Todpfxjgq Nawo Aahsc

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request Additional Information Todsyrtbqopfx Aahoc As new, showroom model Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Tjdpfxjwzbq Ts Aahsc Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Tjdpfx Asmzbkreahjc Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] Todpfxsxur E Se Aahec - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders