CNC Lathe two spindle

GILDEMEISTER SPRINT 65 Linear

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) Djdpsuw Izvjfx Abcocn - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0188, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Dsdour Hfzepfx Abcjcn

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Dcedpfxsw Rdmhj Abcjn Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor Dcedpfx Ajwwa U Aebcjn High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168 h Power-on hours: 61,362 h Technical data: - Max. rpm main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs repair. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece pick-off device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction unit - Electrical interface and software preparation for bar feeder - Synchronous running between main and counter spindles Dedpsvzwm Esfx Abcecn - Hinge belt chip conveyor - 2 additional in/outputs (4 M-functions) - Workpiece counter and time calculator - Rigid tapping (without compensation chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min for turrets 1, 2, and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the working area - Differential pressure system for the counter spindle with the possibility to set 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered on. Price: €28,000 (fixed price) Location: 75334 Straubenhardt Note: Loading and transport must be organized by the buyer! If you are interested or need further information, please contact us.

Condition: ready for operation (used), controller model: Fanuc 310i, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, net weight: 10,000 kg, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Dedpfxsv Rwlto Abcocn Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Dsdpjw Rdlkofx Abcjcn Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.