Sandblaster

GLASNER

Condition: good (used), The system is open at the top. Nodexu Eycjpfx Adwokt Blasting height: 1300 mm Width: approx. 1000 mm Height: approx. 2150 mm Depth: approx. 1400 mm Weight: approx. 1000 kg

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm Nedpfxob Tdqus Adwekt table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Nkodsrxr Rgspfx Adwjt

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Nkodpsxgdr Iefx Adwjt

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Nkodpfxoqcuvwj Adwet

Condition: used, Year of construction: 1985, x-travel 400 mm y-travel 180 mm z-travel 300 mm table-size 760 x 200 mm spindle taper ISO MK 3 spindle turning speed range 40 - 1800 U/min Nkodpfx Adow Tdwrjwst quill stroke 80 mm total power requirement 1,2 kW weight of the machine ca. 0,38 t dimensions 1,75 x 1,65 x 1,9 m Universal milling machine - X-axis without spindle - Central lubrication

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Nsdpfxeqx Szns Adwskt

Condition: used, functionality: fully functional, Year of construction: 2025, Characteristics of the gantry crane: An overhead crane with a lifting capacity of up to 1 ton is a versatile device that can be used in various areas, such as unloading, loading, repairs, warehouse work, assembly and many others. It is an extremely useful tool in halls, workshops and warehouses where effective moving and lifting of heavy objects is needed. The device has been specially designed to work on horizontal and flat floors, allowing easy movement along straight lines. Thanks to four return rollers, the crane ensures smooth movement around the working space, and parking brakes ensure safe stopping in appropriate places. Adjusting the unloaded height of the crane is simple and safe thanks to a lever and two safety screws on each bracket. Additionally, the stability and durability of the crane are ensured by a solid structure and additional transverse struts that ensure torsion resistance. An additional advantage of an overhead crane with a lifting capacity of up to 1 ton is the possibility of installing a trolley with a manual drive, which allows for even greater flexibility and freedom of movement on tracks or guides. Advantages of the gantry crane: Designed for loading and unloading, assembly, repair or storage work in workshops and halls on horizontal and smooth floors Easy to move and install using four return rollers with parking brakes Easy and safe height adjustment when unloaded via a lever and two securing screws per bracket Stable and durable, torsion-resistant structure thanks to additional transverse struts Possibility to install a trolley with a manual drive Technical parameters of the crane: Load capacity 1000 kg Height 2500 mm – 3600 mm Width 2300 mm Double T carrier 76 x 140 mm Total width (base) 2400 mm Upper beam width 2550 mm Total height 2520 mm / 3720 mm Working width for winch 1750 mm Support frame tensioners 4 pcs Transverse reinforcements of the supporting beam 2 pcs Weight 142 kg The overhead crane can be retrofitted with rope or chain winches after using a block or trolley. Overhead crane without a winch visible in the photos ATTENTION!! The machine is a return, without packaging, without zip. Nsdpfxexzr Rzj Adwjkt

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Nkjdpfx Adexxpp Newet Weight: approx 900 kg

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg Nodpob A H R Eefx Adwokt