Cleaning booth, cleaning booth
-Working space:
-Construction: very stable
-Door: 1
-Lighting in: work area
Puer8m
-Dimensions: 520/915/H1570 mm
-Weight: 118 kg
6
4.500 €
Auction ended
consisting of: 2 single cabins, max. air pressure: 10 bar, with 1 suction/filter unit, make: Schuko, type: Vakomat 250 XP and 1 pallet rack segment
Qqjre0iv
Description of the image positions:
1. workpiece screw , 2. Y-switch , 3. turbine , 4. rotating device
5. screw conveyor, 6. air classifier, 7. bucket elevator, 8. control cabinet
9. safety filter, 10. cartridge filter.
PROCESS SEQUENCE
In this overhead conveyor shot blast machine, the workpieces, which are
hooks are manually transported to the blast cabinet on an overhead conveyor system.
The blasting process runs according to the preselected pragramm
and the blasting time.
The combined rotati...
Loop belt through blast machine
Bpoemxtnay
ESAB dust extraction.
Extraction, vacuum filter, self-cleaning absorber, sanding, blasting, sodium, grinding, polishing and all kinds of dry dust.
The vacuum fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum.
Pocket filter cartridge - Multiple nozzles with large filter area .
Fan with 5.5 Kw.
Capacity of 5000 m3/h.
Vacuum 3000 Pa.
Filtration area 40 m2.
Bjuwyfgg0y
Electromotive filter cleaning.
Spigot diameter 300 mm.
Air return.
Additionally, a ...
CM 1000 S3379 werpstraalmachine
Machine specificaties
Tafeldiameter: 1000mm
Cabinehoogte: 400 mm
Turbine: 3KW 330mm
Bm7ojpynmv
-bouwjaar: 1989
- zo goed als nieuwe rubber cabine bekleding
- nieuw turbine behuizing / distributor / Regulator / werpschoepen
- volledig gereviseerde tafel & tafel-aandrijving
- zo goed als nieuwe elevator & elevator aandrijving
- volledige revisie uitgevoerd voor all elektromotoren
- gemoderniseerd bedieningsfront / operating panel ( Siemens )
- volledig voorz...
Blasting cabin, sandblasting cabin, suction blasting cabin, sandblasting system, sandblasting device
-Manufacturer: Radler & Ruf, suction jet cabin 1826 -seat cabin
-Underframe: additional wooden structure to raise it, can be unscrewed
-Extraction: air output 600 m³/h
Bspy3r3p30
-Working space: with lighting
-Operation: via foot pedal
-Dimensions: 785/775/H1960 mm
-Weight: 264 kg
Het reinigen van gevels ist een vak! Here is a good product, but only a perfect result. Not only the quick installation of a machine and the working conditions are important, but also the fact that it can be used for a wide range of tasks. With the IBIX® system, everything is combined into a multifunctional beam that works perfectly with a compressor of about 2 m³. Over the working life, it does not interfere. With a reported product range of 15 to 20 m² by cleaning the surfac...
Sandblaster ROTEC MIKRO-SOFT, the set is NEW, was not used.
The set includes:
ROTEC MICRO-SOFT
Bsgr0jhicx
Sandblasting unit capacity - 60 l - 1 pc
2. dehumidifier for 230 V - 1 item
Pressure washer - 1 unit 4.
Pressure hose 3/4" with nozzle for sand and water - 1 piece of 10 mb
Extension 3/4" as above - 1 x 10 m each
Pressure hose 1" unit - compressor 1 piece of 10 mb
Pressure hose 1" unit - compressor 1 x 2 m
Rotec method
In rotary jet sandblasting, dry granulate or abrasive and water are rota...
Dust extraction, smoke extraction, self-cleaning filter, pneumatic MAHLE with very high negative pressure!
For sandblasting, soda, gypsum, cement, plastics and all kinds of dry dusts.
The filter is cleaned pneumatically with compressed air impulses during operation, which results in high efficiency of the device.
7.5kw fan
Vacuum 7500 Pa
Capacity 1400 m3/h
Nxrdp
Filter cartridges 3 pieces
Blasting cabin, sandblasting cabin, suction blasting cabin, sandblasting system, sandblasting device
-Manufacturer: Vetterkind, blasting cabin
-Interior: 1740/1140 / H1200 mm
-E-motor: MEZ Lammers 2.2 kW
-Large work area: with lighting
Btx7c9rfz3
-Operation: via foot pedal
-Dimensions total: 2230/1800 / H2400 mm
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
