Hydraulic press

Hans Schoen SH-C

Condition: ready for operation (used), Year of construction: 1982, functionality: limited functionality, machine/vehicle number: Fabrik Nr.2977, total height: 2,300 mm, table height: 850 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 10 t, table width: 400 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 400 mm, stroke length: 110 mm, For sale: Hydraulic press – Manufacturer: Hans Schoen Model: SH-C Kdedpfxoxwaume Aarew Year of manufacture: 1982 Pressure: 100 kN Motor power: 3 kW Safety distance: 120 mm Overrun: 15 mm Ram pinhole Ø40 mm Safety light curtain not functioning! Condition: The machine was in regular operation until recently and is in perfect working order. This robust hydraulic press from Hans Schoen is ideally suited for a range of industrial applications requiring precise pressing force. It is distinguished by its reliable performance and durability.

Condition: good (used), Schmidt pneumatic toggle press - 6 tons pulling force Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Kdsdpfx Aaevg Euujrow Shipping with forwarding agent.

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side Kdedpfx Aasu Nfmyerjw with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Kdedsxc Eucepfx Aarsw

Condition: good (used), Year of construction: 1990, SCHMIDT Pneumatic Toggle Press - Rated pressing force: 60 kN - Max. rated pressure: 8 bar - Overrun stroke: 15 mm Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Kdjdpfow Rctaex Aarew Please note that, in order to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight carrier.

Year of construction: 1966, condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm ram: 190 x 140 mm Ksdpfeh Tktiex Aaredw ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm

Condition: used, Hydraulic press machine 6t, HARE 6 HP, 6 Tons, Used machine Manufacturer: Hare Type: 6 HP Kodpoxu Ev Dofx Aarjdw Overall dimensions: Width: 1120 mm Depth: 1150 mm Height: 1940 mm Table size: 250 x 140 mm Stroke length: 100 mm Throughput: 440 x 80 mm Working pressure: 6.1 tons (60 KN) Year of manufacture: 2006 Electrical data: 400V; 3kW; Air pressure: 5.5 bar Weight: 620 kg

Condition: used, Year of construction: 1985, pressure 7 t throat 180 mm stroke 100 mm table surface area 320x300 mm ram surface Ø110 mm hole in the table Ø50 mm table height 850 mm tool hole in ram Ø30 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1300x1300x2000 mm Kdedpjxh Sycsfx Aarjw

Condition: used, functionality: fully functional, DUNKES Pneumatic Press Machine no.: 935 Pressing force at 6 bar: 4 t Pressing force at 12 bar: 8 t Table size (W x D): approx. 280 x 280 mm Installation height: 350 mm Throat depth: 160 mm Stroke: 140 mm Kjdpfjxunnpsx Aaredw