Wide track high-lift pallet truck, pedestrian stacker, tiller stacker; wide track pallet truck, elec

HANSELIFTER - Hanse-Lifter E-SDJ1016-01

Condition: good (used), Year of construction: 1991, Capacity 4 mm, cutting length 2550 mm, mot. back gauge, frontarms with scale, cutting gap adjustment, finger stop, foot pedal, pneumatic back sheet holder Knjdpfx Afsq Tqwrs Ssd

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m Ksdpfxep T Uz Eo Af Send General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Optional: We can deliver the robot with an ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in the robot controller, motor, cable chain, grease pump – fully functional and running. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. Knedpfx Afjfwxxnj Sjd

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm Knjdpfjfg E Hnox Af Ssd capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Ksdpfxsqt Dmyj Af Send When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Kedjn Arm Tepfx Af Ssnd Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: new, The ACE Laser Compact 1313 2.0 R, a state-of-the-art Laser Cutting Machine from KNUTH, is designed to set new standards in price and performance within the Laser Cutting Machines product group. This compact laser cutter is optimized for highly efficient processes, making it ideal for both large production centers and smaller workshops due to its minimal footprint. Built on a robust steel weldment frame, the machine features a lightweight gantry constructed from aluminum die-cast, ensuring both high rigidity and superb dynamics. The linear guides on all axes provide exceptional precision and require minimal maintenance, supported by preloaded ball drives that enhance positioning accuracy. You can easily monitor the cutting process through a safety glass window, while its intuitive PC-based control allows for straightforward operation with a technology database that simplifies programming. The ACE Laser Compact 1313 2.0 R ensures top performance in laser cutting with its powerful Raycus laser source, automatic focus positioning, and efficient nesting software that minimizes material waste. To find out more about this impressive Laser Cutting Machine or to request a quote, please visit our website. Kodpfx Aonh Ng Def Ssnd

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob Knedpfx Aoidlpisf Sod • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. Kjdpofv H Dkefx Af Sond The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Kodpfx Aed Hp Efsf Send Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg.