HB THERM 140 Z 2 series 5(2010) 16kW

HB-Therm 140 Z 2

Condition: like new (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 34.54 kW (46.96 HP), type of input current: three-phase, overall weight: 404 kg, input voltage: 400 V, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, Description: Model: MTA TAEevo TECH 121 Condition: Excellent History: Used exclusively for intermittent final testing of CNC machine tools. Never ran in 24/7 production. Ndjdpfx Aeykn D Rskmoc Location: Derendingen, Switzerland Terms: Availability: Immediate. Logistics: Buyer arranges transport. Loading assistance available on-site.

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clearance (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Nodpfx Akexu Uvaemedc Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 191026ä

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Nsdpfouk I Etox Akmjdc

Condition: excellent (used), Year of construction: 2009, Closure canister 4 cavities per mould Hot runner Two moulds available Nsdpsxrtmxjfx Akmsdc

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t Ndedpfx Akelp U A Iomec dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Nsdpoyf Uy Uofx Akmedc Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm Nodpfowktn Asx Akmjdc • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK Ndodjg Rhx Uepfx Akmoc - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: excellent (used), Year of construction: 2005, Tempereigreat Weinreich Njdoi Ac Twjpfx Akmjdc Type: WTD 4.5 Year of manufacture: 2005 Two units available p 140 °C

Year of construction: 2016, condition: good (used), Moretto COOLER RC15 R4070 (2016) 15,1 kW 4,3 ton kcal/h : 12984 Total average absorbed power: 4,3 kW Tank capacity: 90 dmc RC MINI Portable Chillers Ndsdpox Ttixefx Akmoc The RC MINI series chillers are designed to deliver high standards of energy efficiency and functional performance. Their robust stainless steel construction ensures long service life and excellent corrosion resistance. Thanks to their compact dimensions , the units can be installed directly beside the injection moulding machine (IMM) while maintaining high energy efficiency. Each chiller is equipped with a hydraulic circuit featuring automatic filling , a circulation pump, and an insulated storage tank. A filter and pressure gauge are included as standard. RC MINI chillers are MOWIS-ready. Features 1. Long service life with corrosion-free stainless steel construction 2. High energy efficiency 3. Insulated storage tank