Machining Center - Universal

HEDELIUS BC80

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Dujdpfxey Enzaj Aa Not Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. Dsdpfxsq Suwbj Aa Nout We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. Duedpsx E Ahzofx Aa Nst 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane Duodpfjxtyvpox Aa Njt There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm Dodpfx Aaewm Rqas Nout travel -y axis 560 mm travel -z axis 510 mm

Condition: new, Pit furnace, make VEI type: SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm Duedpfog R Snhjx Aa Nst outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Dsdpfxjr Dd Avo Aa Nsut Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Dujdpsrpn Dvofx Aa Nst

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • has a capacity for 155 tools with HSK63 mounts • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf Duodsx Nkp Ujpfx Aa Nst • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L • Machine Status / Usage • Spindle hours: 12 000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Licence options: ShopMill Sinumerik 5-axis milling 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 700 mm, Manufacturer: PAMA Model:SPEEDRAM 1 CNC Year1996 Spindle:140mm. Tranversal travel:10.000 mm. Vertical travel:2.600 mm. RAM travel:600 mm. Ram Size: 360x320 Spindle travel:700 mm. Spindle taper:ISO 50 Spindle motor power:50 Kw. Spindle speeds: 6 ÷ 2000 Rpm. Cnc:CNC Selca 3045 ATC: 60nos. Total weight:65 Tons. Features and Accessories Complete with: - n. 1 automatic universal milling head - n. 1 Floor plate 6000x2500x300mm -n. 1 Floor plate 4500x2000x300mm - Rotry Table 2000x1600 with long travel 2000mm Duedpfjwzh Apex Aa Nst -Loading capacity on table:15ton - levelling shoes