Milling Machining Centers 5 Axis

HEDELIUS RS605 K IC 40/530/570/500/8

Condition: good (used), Year of construction: 2005, Tool holder BT 40, 12.000 rpm, 60 tool places in tool changer, Fsdpewbaqljfx Ag Rjft 70 bar IKZ, laser Renishaw OMI-2. Parts shown by hand not come.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA) Fodpfjwuddvex Ag Rjft

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices Ffodpfxswp S Sqo Ag Rst chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Turning length = 653 mm Ffedswl An Ijpfx Ag Rjt X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine Fsdpfx Aotzyx Tjg Rsft - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Ffodpjxb Ufujfx Ag Rst Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Fedpfet Dmmvsx Ag Roft Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Ffsdpew Eb Itefx Ag Rot Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h Fodpfxewcg Ero Ag Rsft - Heat unit

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min work piece spindle speed 700 U/min total power requirement 146 kW Ffedpfx Agevxww Ss Ret weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels