High-performance horizontal band saw

HEMA CoreCutter 900 - Horizontalbandsäge

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min Bdedeumvkvspfx Addjk - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Bdedokkiwxjpfx Addok

Condition: ready for operation (used), Year of construction: 2011, Connected load: 36kW, length: 2750mm, width: 2750mm, height: 2000mm, weight: 2.5t, with documentation, operating hours: 20h, an on-site inspection is possible. Bdsdpfx Aoqi D Tgjddok

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, working width: 1,650 mm, Stock laminating machine - semi-automatic Type: A134RS. 1650x2000 Year 1998 Max.size: 1640x2000 mm Bsdpfx Adstqzqhsdedk Min. size: 450x450 mm Cardboard: 100-800 g/sqm Corrugated board: 300 g/sqm - 7.0 mm thickness

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Bedpfx Adovrip Hodedk

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Bdsdpfevripyox Addok

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 70996, total width: 2,375 mm, total length: 2,375 mm, total height: 2,000 mm, overall weight: 4,500 kg, Bridge punching machine - Punching force 700 kN - Table dimensions 1600 x 650 mm - Stroke trigger - button or light curtain, 1- and 2-stroke - New motor coupling, pump inspected, unit sealed Bridge guide - Slide pads replaced, photo documentation of the work - Frequency-controlled bridge travel motor - Slight signs of wear, paint partially touched up Bdedpfxewduymj Addsk - Machine thoroughly repaired and inspected according to manufacturer's standards - Photo documentation of the work available - CE certification according to the German Industrial Safety Ordinance - Complete documentation

Year of construction: 2024, condition: new, Cutting force 30 Tons or 60 Tons Bdodpfx Adjnfu Nwjdok Table surface 1000x600mm or 1600x800 mm The electro-hydraulic upstroke cutting machine with motorized moveable beam type USC is a machine which has been constructed due to our long experience on this area of cutting machines. They are characterized by maximum operational reliability and an optimal overview onto the working table when the cutting beam is retracted. In the standard version of machine the working cycle is released by the contactless operating security light curtain or via the 2 start buttons mounted on the left and right of the machine. The stroke and passage of the machine are continuously adjustable within the specified limits via an electronic measuring system / potentiometer. An eccentric load on the machine is possible due to the extremely stable central guide column and the arrangement of the two hydraulic punching cylinders. The hydraulic power unit in the modular system is housed entirely at the rear of the machine and is easy to access for maintenance purposes. An automatic central lubrication supplies all lubrication points in the stand with a sufficient quantity of lubricating oil. The electrical switching devices are housed in a separate control cabinet, which is permanently installed on the machine. The setting of the machine by means of clear operator guidance is carried out via the touch panel on the side of the machine. A freely programmable controller processes the processes reliably and quickly.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, saw band length: 6,550 mm, cutting width (max.): 780 mm, table height: 1,050 mm, overall weight: 1,250 kg, working height: 1,050 mm, roll diameter: 900 mm, power: 11 kW (14.96 HP), HEMA demonstration machine from a trade fair exhibition UH 900 band saw with - swivel device - High-performance feed, 0.50 kW frequency-controlled - three-phase motor 11 kW Bjdpfxet Dkm Tj Addsdk - Hydraulic saw band tensioning - Precision table tilting device with handwheel and toothed rack - Spraying device - and much more.

Condition: reconditioned (used), Ribbon mixer Bdsdpewygclofx Addek Machine has been overhauled Capacity: liters Motor power: 3kW, 23 rpm Material: Steel