Used other plastic processing machinery for sale (66)

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12086, COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit Gsdpfx Aon Awh Uslbsuc - Stapler

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Gsdpohqmghofx Albjuc Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: Godpfx Ajn D Hczjlbsuc -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Year of construction: 2000, condition: excellent (used), Available: Immediately Gusdpfx Aljyrfwwjbsc

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Gjdpjpr Ut Njfx Albouc Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Condition: excellent (used), Year of construction: 2011, operating hours: 70,792 h, machine/vehicle number: 1001, Article-No.: DSDX.2C Gjdpjyhpppofx Albjuc Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12087, COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS Guedpfxjn Awnde Albjc Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Gueden D E Hpjpfx Alboc Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Equipment / Additional information: Gujdeyhpqtspfx Albec The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. Gjdpfxsud Dqko Albjuc The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Tool magazine: 12 positions Extendable tables Gujdpezcpkcefx Alboc Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2014, condition: excellent (used), Heating rail TG 200 mO from Herz for heating thermoplastic materials (e.g., acrylic glass). After localized heating, the acrylic glass sheet can be easily bent. Gujdpfxozafiie Albsc A video of the machine in operation can be sent upon request. Two-sided heating system with infrared emitters and digital temperature controller, as well as an automatic timer. The timer starts automatically when the upper flap is closed, setting it to the pre-set value. After the set time has elapsed, a warning signal sounds to indicate that the material can be removed. Maximum working width approx. 2000 mm. Maximum sheet thickness, according to the manufacturer, is up to 12 mm due to heating on both sides of the sheet. Connection value: 230 volts / 2800 watts. With a practical parallel stop up to 1000 mm deep. CE marking. Operating manual. Dimensions approx. 2500 x 1200 x 200 mm (L x W x H). Weight approx. 35 kg. The machine can be demonstrated on-site after scheduling an appointment. We only offer machines that are readily available in our warehouse for demonstrations, see "other offers from this supplier".

Condition: like new (used), Two cabinets with 12 drawers: ejectors – round and flat. Price per item only €10. Guedpfxoxz Rx Ds Albsc

Condition: good (used), Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Guedpfxey Ez Tie Alboc

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, Gjdpfoxcvt Asx Albouc - vacuum fan for holding down the material on the worktable. The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Guedpfx Aewgc I Rslboc Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, The two hot runner systems from Feller are for sale, priced at €1,350 each. Gsdpfxoza U Egj Albeuc

Year of construction: 2011, operating hours: 35,000 h, condition: ready for operation (used), This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details. • Operating voltage: 3 x 400V + N + PE / 50 Hz • Connected load: 225 kVA • Nominal current: 264 A • Preliminary fuse: 315 A • Short-circuit strength: 50 kA • Control voltage: 24 VDC • Max. forming area: 860 x 2350 mm • Min. forming area: 340 x 1200 mm • Max. forming part height: 350 mm • Film level: 1805 mm • Max. lower table stroke: 1330 mm • Max. upper table stroke: 585 mm • Rotary upper table: 4-part (Forming / Punching) • Punching force upper table: 30 kN • Punching counterforce lower table: 30 kN • Operating pressure: 6 bar • Compressed air requirement: approx. 300 Nl/cycle • Max. roll diameter: 600 mm • Max. film width: 1100 mm • Max. film roll weight: 400 kg • Coil diameter max: 76 mm • Vacuum system suction power: 2 x 300 m³/h • Vacuum system power: 7.6 kW Gusdpfey Rprqex Albsc • Tank volume: approx. 1000 L • Side channel blower suction: 14 m³/min • Side channel blower power: 8.5 kW • Feed width chain rails: max. 940 mm

Year of construction: 2015, operating hours: 44,309 h, condition: ready for operation (used), total width: 13,550 mm, total height: 7,510 mm, pressing force: 408 t, product length (max.): 18,000 mm, This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details. • Application: Door panel FAT/FOT (Left Hand / Right Hand) • Connected Load: 692 kW • Rated Current: 1000 A • Voltage: 400 V AC / 24 V DC • Frequency: 50 Hz • Operating Pressure (Pneumatic): 5–7 bar • Air Consumption: < 300 l per cycle • Pneumatic Connection: G 1/2 • Pneumatic Air Quality: Dried / Un-oiled Gujdpfx Aley Rpk Hsboc • Ambient Temperature Range: 15–40 °C • Relative Humidity: 20–70% (non-condensing) • Noise Level: < 82 dB • Main components included: • HOP400 Press: 4000 kN press force; 2500 x 1800 mm press area; approx. 79,000 kg • HOP300 Calibration Press: 3000 kN press force; 2100 x 1300 mm press area; approx. 24,000 kg • Feeding Table: 2400 x 1800 x 1100 mm • Hydraulic units for form and calibration presses • Tool change systems (Left and Right)

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V Gujdpfx Aey Rpdtolboc • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Year of construction: 2026, condition: new, functionality: fully functional, IG BAG DISCHARGING STATION Industrial system designed for the safe and efficient emptying of bags and Big Bags containing bulk materials and powders. Main Features: Heavy-duty steel frame construction Adjustable material vacuum system 4 pneumatic cylinders for complete bag emptying Safety access door for bag opening and handling Integrated collection hopper Suitable for powders, granules, and bulk materials Easy maintenance and cleaning Applications: Suitable for: Food industry Chemical industry Plastics industry Pharmaceutical industry Feed and pet food industry Powder and bulk material handling Approximate Dimensions: Structure footprint: approx. 1400 x 1400 mm Total height: approx. 3200 mm Guodsy Ubu Sopfx Albjc Custom solutions are available according to material type and production requirements. Contact us for further information, technical specifications, or a customized quotation.

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT Gedpfx Aley Id Tqjbouc _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12915769, The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg Gsdpfx Asy Tm A Ejlbjuc For sale only to businesses, with exclusion of warranty.

Year of construction: 2007, condition: used, functionality: fully functional, The used WEMA WTD 35/M9 hot runner control system is a precise hot runner temperature control unit, specifically designed for use in plastics processing (injection molding). It is used to precisely control the temperature in hot runner nozzles or manifolds, ensuring consistent melt quality. Data: 9 control circuits, each with 3,300 watts 230 volts 16 amps Gujdpfx Asy Tmtdjlbjc Microprocessor-controlled On the rear, each with 1 x 24-pole multi-plug base for power and thermocouples For sale to businesses only, without warranty.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12915769, overall weight: 40 kg, The used unscrewing unit (2 directions, for a 270 C / 370) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Long version Dimensions: 200x350x600 mm Godpfx Alsy Tkh Sobouc Weight: 40 kg