Vertical machining center

HERMLE C30 V (HSC - 40.000 RPM)

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Rjdpfxjif Ek Ro Abhew Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Rodpfsfhb Tkex Abhow

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A Rodeydmbujpfx Abhsw 3 turrets Parts conveyor Magazine Further details on request

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Redpfxjtwliws Abhow Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg Rodpfxozawmae Abhew weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device, handwheel only about 1.500 h

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Redpfjtvau Aex Abhjw Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Rodpfxjixz D Ue Abhjw Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm control Siemens weight of the machine ca. 9000 kg Rsdoyuzfpopfx Abhjw

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Axis: Longitudinal Traverse (X Axis): 500 mm Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Rjdpjy Smynofx Abhow Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Condition: ready for operation (used), Year of construction: 2012, Main Drive Number of axis 5 This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Application Types Rjdpjx D I Rpofx Abhsw Turning