Toggle bolt

Hilti EKD-HM5

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Gbsdpfx Anjw Uf Ihezon Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: Godpfjxk T Efox Anzjbn • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: Gbedpfx Aswf N Stenzen ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Gbjdpfxsqagl Hj Anzjn Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,265 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004183 The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. When ordering a car trailer, please state the GVW of the vehicle with which you are towing the trailer. Technical data of the Garden Trailer 201 KIPP car trailer WHEEL - Steering axle from Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Gbsdeir H Rpjpfx Anzon Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDEWALLS - all sidewalls are made of galvanized steel Delivery costs are charged additionally.

Condition: new, Technical data of the grating: Manufacturer: Gi-Ro Vreden Condition of the goods: new (unassembled) Reason for return: wrong order end customer The scope of delivery includes: 01x pressed grate, new (unassembled) Material color: hot-dip galvanized Total depth: 1,000 mm (bearing bar direction) Total width: 980 mm (cross bar direction) bearing bar dim.: 35/1,7 mm S355JR Gbsdpfx Ask Ebq Tenzsn TS anti-slip: no QS anti-slip: no edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9,35 kg | pcs. Internal designation: R

Condition: new, Various bimetal saw blades, HSS, in the following dimensions: 1735 x 13 x 0,9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm Gbjdpec R Tyfofx Anzon 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Gjdpfx Asw Nklhenzsbn Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 1990, color: green, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit Body: Skip containers approx. 5 m³ to 20 m³, open / lid. Various skip containers from approx. 5 m³ to approx. 20 m³. Price depending on condition from €350.00 net to €750.00 net 1x 3.5 m³ with lid 2x 7 m³ with flap Gedew S Niwepfx Anzsbn 13x 10 m³ 2x 10 m³ with lid (flat) 1x 12 m³ with rear doors 1x 15 m³ with rear doors 1x 20 m³ with rear doors Manufacturer cannot be determined as the type plate is missing. While the containers are still in transit, no single containers can be offered. Minimum purchase of more than 10 or the entire lot. Location: Uder (near Heilbad Heiligenstadt) All information is provided without guarantee, as the containers are in transit! ACCESSORY DETAILS WITHOUT WARRANTY. Subject to change, prior sale and errors!

Condition: used, Air demolition hammer Gbjdecm I Uispfx Anzsn -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg