Chilled water unit, refrigeration system ENR 008

Hitema ENR 008

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional Gisdpfx Aex Dkmgelbju General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg Gedpfx Alsg Ezareboiu *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2024, condition: new, The FL-430 automatic labeler is perfect for fast and automatic labeling of flat products. The friction feeder allows products of different thickness, dimensions and material to be easily and reliably separated. - LCD display - Standard speed of up to 30 m/min. and a max. label width of 140 mm in combination with the friction feeder 400 installed. - Extended version dispensing labels with a max. speed of up to 50 m/min. and a max. width of up to 260mm - Transparent labeling possible Gjdpoickh Refx Albeiu

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger - Suitable for powder and granulate Gjdpfx Alsrvxn Ijbeiu - Screw diameter: 35 mm

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Gisdpfopu R Ncox Albsu Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Gisdpfx Aljf I Ew Hsbeu Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Gijdpfx Aljvbgiiebeu Table size: 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Gijdpfx Astk N E Ajlbeu Do you have any questions? Then we are at your disposal.

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec Gijdsgipiljpfx Albeu retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Condition: used, Year of construction: 1996, APV Compomaster Type KCC Standardisation unit for continuous standardisation of the fat content in milk and cream. Complete, Stainless Steel, 2 Pieces identical. Giedjfw A Unjpfx Albou