Vertical lathe
HNK VTC-20/30

Year of construction

2025

Condition

New

Location

Bad Oeynhausen Germany

Show map

Machine data

Machine type:: Vertical lathe

Manufacturer:: HNK

Model:: VTC-20/30

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Weserstr. 228, 32547 Bad Oeynhausen, Deutschland

Call

Technical details

Turning height:: 2,000 mm

Workpiece weight (max.):: 12,000 kg

Faceplate diameter:: 2,000 mm

Details about the offer

Listing ID:: A20350715

Update:: 22.10.2025

Description

CNC Vertical Turning Center
Model: VTC-20/30 with Fanuc 31i-B

Table diameter: Ø2,000 mm
Maximum swing diameter: Ø3,000 mm
Maximum turning height: 2,000 mm
Table speed: max. 200 rpm
Table load capacity: 12,000 kg
Table indexing: 0.001°
Z-Axis (vertical ram travel): 1,200 mm
Main spindle speed: max. 15 ~ 2,000 rpm
Ram size: 240 mm x 240 mm
Milling spindle taper: ISO 50
Dedpfjxqb D Nsx Addocr
Tool shank size: 40 mm x 40 mm
Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic)
Rapid traverse X-axis: 10,000 mm/min
Rapid traverse 7-axis: 10,000 mm/min
Cutting feed rate: 1 ~ 3,000 mm/min
Table drive motor: AC 45/55 kW (continuous / 30 min.)
Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.)
Control: Fanuc 31i-B
Display unit: 15-inch TFT-LCD
Tape memory: 1 MB
Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools)
Standard tool holders: New 240 TCR-01 (2 pieces)
Splash guard: Table version (R-type standard)
External coolant system: 3 bar (80 liters/min.)
Chip conveyor: hinge-type
4-jaw independent manual chuck
Foundation anchor bolts / shims
Maintenance tools and toolbox
Hydraulic power unit
Work area lighting
Signal lamp: 3 colors (green, red, yellow)
Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions
Power supply: 220 V, 60 Hz, 3 phase
Machine color: manufacturer standard

OPTIONAL ACCESSORIES (#1)
Automatic tool changer ATC 24 positions - on request
Automatic shutdown for N.C - on request
Turning tool holder type 240TCR - on request
Through-spindle coolant supply: 30 bar (pump pressure) - on request
Transformer 415 V, 50 Hz, 3 phase - on request
Linear scales X, Z-axis - on request
Rigid tapping - on request
Automatic tool changer ATC 24 positions - on request

Other notes:
INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price
INSURANCE AND FREIGHT - not included in the price

Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer.

The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

The listing was translated automatically. Translation errors are possible.

Documents

20350715-01.pdf

Seller

Registered since: 2020

11 listings online

Call

Send inquiry

Telephone & Fax

+49 172 2... show

These listings may also fit your interest.

Listing

Gear Hobbing Machine - Vertical EMAG WF180

Germany

8,869 km

Gear Hobbing Machine - Vertical
EMAGWF180

Call

Listing

Planer-Type Milling M/C - Double Column CORREA FOX M65

Europa

6,478 km

Planer-Type Milling M/C - Double Column
CORREAFOX M65

Call

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm Dsdpfx Aoxb Ed Usddjcr distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

See details

Listing

Cylindrical grinding machine ehr SAXW 1000

Tönisvorst

7,036 km

Cylindrical grinding machine
ehrSAXW 1000

Call

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Dcedpfswb Dq Njx Adder

See details

Listing

Gear grinding machine retrofit WMW Niles ZSTZ 630 C3P

Düsseldorf

7,016 km

Gear grinding machine retrofit
WMW NilesZSTZ 630 C3P

Call

Listing

Berlingo

6,776 km

Swiss CNC lathe
StarSR32J

Call

Listing

Planer-Type Milling M/C - Double Column WALDRICH-COBURG POWERTEC 4000 AP

Germany

6,760 km

Planer-Type Milling M/C - Double Column
WALDRICH-COBURGPOWERTEC 4000 AP

Call

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t Dedpfx Aovwgm Heddecr ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

See details

Listing

Cnc turning and milling center HWACHEON C1 YSMC con FANUC 0i TF

Faenza

6,633 km

Cnc turning and milling center
HWACHEONC1 YSMC con FANUC 0i TF

€50,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2020, operating hours: 1,139 h, functionality: fully functional, turning length: 599 mm, turning diameter: 530 mm, spindle motor power: 11,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 56 mm, travel distance X-axis: 530 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 599 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Double magazine: Revolver turret + Internal magazine with additional 12 CAPTO tools protected in internal magazine + 12 mounted in turret + 6 25 mm square hybrid attachments (see attached technical sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Hand piece collector and finished piece exit carpet, Work lamp, ----- Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Dcjdpfxevv Tvfe Adder Double magazine: Revolver turret + Internal magazine with an additional 12 CAPTO tools protected in the internal magazine + 12 mounted in the turret + 6 25 mm square hybrid attachments (see attached technical data sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Piece collecting hand and finished piece exit carpet, Work lamp,

See details

Listing

Hagen

6,961 km

Vertical lathe
DMCDL 80V

Call

Listing

Weiterstadt

6,885 km

Lathe - cycle-controlled
DMGNEF 600

Call

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Dsdpfx Adoucl Aledjcr Tailstock MK 5

See details

Listing