Holzprofi Maker scissor lift table

Holzprofi Maker M1-HUB-S-350MDF-1200

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Knodpjwmxh Tofx Aanjf

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. Kodpfx Aeu R Szajanonf For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW Kjdpfjvx Dz Dox Aansnf 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. Knedpfx Aajxqggcjnef • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Kündig Premium-2 1350 RP Quality product from Switzerland Constant Table Machine / Automatic Head Positioning Wide-Belt Calibration & Fine Sanding Machine 1st Unit: Grooved Rubber Contact Roller, 80 Sh Contact Roller Level Infinitely Adjustable According to Grit Scale 2nd Unit: Pneumatic Sanding Pad Unit Abrasive Belt Drive Motor Power: 15 kW Working Width: 1350 mm Maximum Workpiece Pass-Through Height: 200 mm Feed Speed: 3 - 15 m/min, Infinitely Adjustable Automatic Workpiece Thickness Setting ENORMATIC Quick Adjustment with Feed Activation (for long workpieces) PLC Control with Touch Screen and Teach-in Memory for Automation and Management of All Work Programs Infeed and Outfeed Tables with Roller Support Additional Foldable Outfeed Table Machine is KÜNDIG – FACTORY SERVICED First delivered in 2018 from training workshop / retirement Few operating hours Available ex stock Lieboch / Leasing option Knjdsx A T Epopfx Aanof

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Knodpfexczmzjx Aanef Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 99,000 EURO!!! Price valid only until December 31, 2025. Don’t miss this opportunity! We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw—extended version with automatic storage handling capabilities. The SAWTEQ B-400 model is a HOMAG panel saw featuring automatic loading, capable of performing cuts at exceptional speeds. Designed for high-volume panel processing, the SAWTEQ B-400 ensures top-quality finish cuts and is distinguished by its reliability, precision, high power, and fast operating speed. The saw we offer is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly from the manufacturer to our facility. The machine was only started up by the HOMAG POLSKA Sp. z o.o. service team and has not been used since. In the industry, neither this model nor the Homag brand needs introduction—Homag is recognized globally as a leader in the production of state-of-the-art, high-quality equipment. Our model comes exceptionally well-equipped and is nearly fully loaded. For reference, a similar saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and additional equipment, costs around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput enabled by automatic loading and substantial saw blade extension. - High efficiency with relatively low space requirements. - Designed for optimal material flow and precise logistics. - Engineered for integration with networked production processes. We maintain direct contact and support from the HOMAG manufacturer if installation and commissioning are required at the new owner’s site. We believe that the discount we offer—over 45% off the new price—provides an extremely attractive option for buyers seeking a modern saw compatible with automatic storage, or for those who may utilize this feature in the future. This translates to a saving of roughly 90,000 EURO net or approximately 400,000 PLN net*. The saw can, of course, also be operated without an automatic storage system. Knedpfx Aaew Exk Eonsf General terms of sale: - The machine is BRAND NEW, produced in 2020, but we do not provide a warranty or guarantee. - No returns are accepted. - The price quoted does not include VAT (23% for Polish buyers), which will be added to the invoice—please ensure you verify how we display pricing in the listing. - Single ownership. * Price in EUR converted at the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all Machineseeker users. We are new to Machineseeker. Please note, we are not a furniture producer, manufacturer, or machinery trading company. We are a property developer in Warsaw (the capital of Poland) and own numerous properties locally. The machinery we list is our property, obtained through settlements with tenants from the furniture industry. We know the machines’ history and their condition matches our descriptions. We are in direct contact with the machines’ manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—for any additional support that may be needed. Since we do not require these machines, our prices are very attractive, especially as these machines are virtually unused. We can assist with transport anywhere in Poland or within the EU. We invite you to inspect the equipment before purchase. Kind regards.

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Knjdpfoh Izk Uex Aansf

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW Kedpfx Asw E Ty Ueanjnf - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Kedpfxswvq E Aj Aanonf