Guillotine

Horizon APC-61II

Condition: excellent (used), Soco Automatic Case Sealer / Box Taper Dcodpfxehvr Afs Ai Son Model T55 For random size boxes Top and bottom tape heads Adjustable height legs Complete with infeed and out feed gravity roller conveyors In excellent condition Delivery / Shipping can be arranged if you require this service

Condition: used, 2 Farben Offsetdruckmaschine / 2 Color Sheet-Fed Offset Press PM-QM46-2 N+P Dcedeyv A S Uopfx Ai Son Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Dedjyx Uy Aepfx Ai Secn Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Perfect binder with clamp, hotmelt gluing, manual cover feeder, with mobile base, binding length: max 310 mm, book thickness: max 60 mm, output: up to 320 books/h, max format: 320 × 310 mm, weight: 186 kg, 230V power supply. Dsdjxt Nywjpfx Ai Sscn

Condition: good (used), Schmedt – PräRund – PräDeck – PräKant, in good condition, immediately available. Dodpfx Ash Dy Ivji Socn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: brochure finisher, raster image processor, We are offering this very well-maintained Xerox C60 digital printing press, manufactured in 2021. Included: EFI Fiery (external) DUAL OHCF PR Booklet Finish + FIM Total clicks on the counter: only approximately 315,000! If you have any questions or require further information, please feel free to send us a message or call us. Dsdpfozlundjx Ai Sjcn

Condition: good (used), Gierlich P 4000 embossing press, A4 size, manufactured in 1985, machine number 7501, in good condition, available immediately. Dcjdpfx Aevt Rwnsi Ssn If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises after prior arrangement.

Condition: used, Year of construction: 2009, machine/vehicle number: 340127, Falzmaschine / Folding Machine Hefter TF Master MBaujahr / Year 2009 - SN. 340127 Papier-Format / Paper-Size min. 100 x 130mm Papier-Format / Paper-Size max. 297 x 432 mm Falzarten / Folding Types Einfach-, Wickel-, Zick-Zack-, Doppel-Parallel-, Außen- und Altarfalz Papiergrammatur / Paper weight 45 bis 157 g/m2 (Doppel-Falz bis 135 g/m2) Papierlage Bis / Paper length until 500 Blatt 60g/m2 Papier Geschwindigkeit / Speed 70 bis 130 Papiere/Minute Papiereinzug / Paper infeed 3 Rollen Friktions-Einzug Auflagenzähler / Counter 4-stellig digital Anschluss / Eletric 220 bis 240 Volt 50 Hz Abmessungen Aufgebaut / Machine dimensions 920 x 490 x 525 mm Gewicht / Weight 32 kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Djdpfjk Tu Enox Ai Sjcn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 027012, Flatpile Feeder 4 Pockets 1 Knife 1 Side Pocket Cleaned Djdsf Swnljpfx Ai Sjcn

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D Dcedpehkkwbefx Ai Son X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)