Used punches for sale (64)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Ihsdpjww E Nrefx Adwjt Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Safty Cover Weight 3800kgs - Power supply 380 V Ihedpfxex U Adnj Adwjt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1994, Max format 103x72 cm min format 40x35 cm max speed 8000 per hour cutting force 250 t Quick lock frame Micrometric Stripping Unit with Quick lock upper chase and lower chase Tools, Manuals and Accessories Ijdpfxsx S Hl Rs Adwjht Non-stop in feeder + delivery Stream feeder

Year of construction: 1999, condition: good (used), Seiko flatbed die-cutter type SU-1700 Year of manufacture: 1999 Available immediately Max. sheet size: 1620x1120 mm Speed: 3,300 sheets/hour Ihsdpfxex Ux R Dj Adwjt

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Ijdpfjxc Uv Asx Adwsht

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides Ihodpfox R Tiasx Adwot - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Ihsdpfjlyqrcox Adwst Machinedelivery 6-8 month after order

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph Ihedpfxjvfxwts Adwst

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Isdpexxypyjfx Adwjht

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Ihjdpjx Ndu Defx Adwst Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Machine no.: SBDS32250 Ihedjw Inz Depfx Adwet

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Ihedpfx Adjx Hzm Sswet

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Ihjdpfolyqpdox Adwjt Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Iodpfx Adjvfx Ulewsht Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: ready for operation (used), functionality: fully functional, Rotary die cutter in very good condition, hardly used. Isdpfoxz Tn Uex Adwjht Contact details of a highly reputable die manufacturer can also be provided.

Condition: good (used), Year of construction: 2008, Wook IL Automatic Flatbed Die Cutter WTNS-SSF 2500 Max. sheet size: 2500 x 1500 mm Max. speed: 1600 sheets/h Max. die-cutting force: 600t 400V, 50Hz Year of manufacture: 2008 Pre-feeder, fully automatic hf-technology MFS 2500 HBL, Model 2516 Max. sheet format: 2500 x 1650 mm Min. sheet format: 600 x 450 mm Max. speed: 13,200 sheets/h Isdjxtmxkjpfx Adwoht Max. pile height: 2400 mm (min. 500 mm) Max. pile weight: 2000 kg 400V, 50Hz Year of manufacture: 2011

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: Nr.7723202, total width: 2,500 mm, total length: 3,400 mm, total height: 2,500 mm, overall weight: 9,000 kg, input current: 20 A, input voltage: 400 V, Best hand-built letterpress machine in 72 x 101 format. Requires very little space for this size. Extremely robust construction. Motor has only run for 3 years after overhaul, feeder table belts made from Habasit. We have three of these machines in daily production ourselves, used for die-cutting, creasing, perforating, and blind embossing. Output per hour is easily 3,000 to 3,500 sheets. Can also be converted to 72 x 102 cm format. Die-cutting plates for these machines are available from us. We have four of these Condor machines in stock, and they can be purchased in a package of 2 or 4 units. Iedox A S Ipspfx Adwoht

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Isdpfx Adoxz Ncbewjht

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Ihodpfx Adslyp Emowst Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Condition: excellent (used), Longitudinal Cutting Saw MZ Project LC 5000 Cutting length: 5000 mm Cutting height: 100 mm Cutting speed: 0–60 m/min Saw blade size: 350–500 mm Saw blade bore diameter: 35 mm Saw blade rotational speed: 3000 rpm Main motor power: 11 kW Machine dimensions: 6900x1700x1840 mm Weight: approx. 3000 kg Ihjdpfsxcx Sbex Adwst

Year of construction: 1970, condition: good (used), functionality: fully functional, STC-Ref:G-251-6113 Iodpfx Adsxw H N Doweht Bobst Standard 1300 grooving machine, Year: 1970 format: 100 x 1300 mm equipped: - creasing machine - corrugated board max. 3 - 7 mm max. - speed 100 m/min. max. - paper size max. 13,5 x 130 cm cm - paper size min. 8 x 13,5 cm - paper thickness 0,5 - 4 mm --> available: 12/2025

Condition: good (used), Year of construction: 2012, ETERNA PE 1620 SA - ELITE Year: 2012 Max. Size: 1620 x 1200 mm Max. Cutting Force: 400 t Max. Speed: 3500 sheets/h Ihsdoxpnrwspfx Adwjt Centerline QuickLock System Chaseloader

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Ijdpfx Adet H Nhhjwjht Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Year of construction: 1979, condition: good (used), functionality: fully functional, Bobst SPO1600 + 2 Color SPO Flexo Max. Size: 1100x1600 mm Min. Size: 520x600 mm Max. Speed: 6000 sheets/h Max. Cutting force: 400 T Year: 1979 Flexo Anilox: 1x ceramic and 2x chrome In production Iodpfx Adjxl Am Uewoht

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Ihedpfx Adjt H Nc Sewjt Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months