Four-way side loader

Hubtex DQ45-G - TRIPLEX

Condition: excellent (used), Timesavers Series 42 WRB Machine technically overhauled, operates flawlessly. 1st station: Grinding unit for removing pronounced burrs and splatter; surface finishing with Scotch band is also possible. 2nd RB brush unit, 8 deburring rollers for all-around, uniform edge rounding. Working width of 1350mm. Gsdpfx Ajxl A D Tjh Doca Vacuum conveyor belt Conveyor belt speed infinitely adjustable via potentiometer Brush speed infinitely adjustable via potentiometer Part thickness from 0.8 to 100mm Additionally included: dry dust collector Machine available from mid-November. For further questions, feel free to contact us directly.

Year of construction: 2025, condition: new, Transport trailer Payload 6000 Kg 4000 mm long 1600 mm wide 540 mm high turntable steering rigid trailing axle transport floor wood 27 mm reinforcement bandages 415 x 100 with steel rims paint RAL 2000 drawbar with eye 40 mm and drop safety device Gedpfx Aehwna Ajh Dsca

Condition: good (used), - Used machine - Passage width: 1350 mm Gsdpfx Aowhvfxsh Deca - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Gcodpsxuu Dksfx Ah Dea Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Godpfx Asvxd Ttoh Djca Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, working width: 1,300 mm, overall weight: 4,000 kg, working height: 1,000 mm, height adjustment type: electric, transport height: 1,000 mm, Calibrating / Wide Belt Sander Manufacturer: Costa Gsdsxl N Thjpfx Ah Deca Model: 71 CCT 1350 Working width: 1300 mm Equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller – newly rubberized (hard rubber 60 Shore), 18.5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding pad, 15 kW 1x dust removal brush 1x blow-off unit Feed speed adjustable, 4 – 24 m/min. Conveyor belt with vacuum Vacuum blower with silencer Working height: 1000 mm Height adjustment of the upper machine part (easy integration into existing production lines) Connection: 380 V 50 Hz, 200 A Total connected load approx. 65 kW Dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) Weight approx. 4000 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 9,850 h, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Gcsdpfxjwz S Ame Ah Dea Mast type: Standard Condition: Ready for use and fully functional Technical condition: good