Machining centre

HURCO VMX 30

Year of construction: 2001, condition: ready for operation (used), A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible. Guedpfx Ahew Dfg Dsajf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes 1 unit with 4 axes with hydraulic station without vapor filtration system Gujdpfx Ajyap R Dehaef 1 unit with 4 axes with hydraulic station with vapor filtration system

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Guedpfx Aszudd Tshaof

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] Gujdpfx Ajy Tzctohaef A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Godpfx Ajvf D Anohaouf

Condition: excellent (used), Year of construction: 2018, operating hours: 2,240 h, Hurco VMX30i vertical machining center Year: 2018 Power on hours: 8220 Spindle hours only: 2240 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Gjdpfxjzqzwpo Ahasuf Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling Under power in our warehouse. Clamping units, vices, are not the scope of the delivery.

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm table surface area 1.020 x 510 mm control WINMAX spindle turning speed range 12.000 U/min Guodpfxjznnc Ts Ahajf spindle drive 13,5 kW 24 St. tool adaptor SK 40 | | internal coolant system feed 20 bar rapid traverse 35/35/30 m/min weight of the machine ca. 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Guodpfsu Dn Txox Ahasf Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Gujdpfx Asx N E H Uehaef Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 2014, Controller WINMAX DSM Table size 1020 × 510 mm Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 18000 rpm ATC magazine 40-positions Spindle type HSK63A Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 5000 kgs Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, - Renishaw zero point presetter - Air coolant through the spindle - Chip Conveyor - Portal Handwheel - Machine mounts Gusdpfx Ahsyxb Dhsaof The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Gujdpfx Ahoxrcnlsasf

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor Gsdpfxsv D U Apo Ahajuf

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, Gedpfx Ahozh I Ageasuf WinMax 5 control, through spindle coolant, swarf conveyor.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Godslz Rvljpfx Ahasuf Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Guodszh Hvxopfx Ahaof Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor.