Vertical machining center

HURCO VMX30 UHSI

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens Godpfxezl Hbce Ap Dobu TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Gedpfoyffigex Ap Dsbu Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Gbsdjuiy Hrepfx Ap Deu Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Godszam E Espfx Ap Dsbu Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Removable handwheel

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] Gbodpfsy Tzc Hox Ap Dju - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Gbedpotk It Ssfx Ap Dju Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Gbsdpfx Apsyl Uh Sj Dju Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 Gbedpewmwrdefx Ap Deu x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Year of construction: 1982, condition: used, In Good Condition Gbedpfedq Ug Ijx Ap Deu

Year of construction: 2019, condition: used, Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h, Control: Heidenhain. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible. Godpfx Apozwftbo Dobu