Diesel Forklift

Hyster H12XD6

Condition: good (used), machine/vehicle number: 3576, Year of construction: 2022, load capacity: 12,000 kg, lifting height: 4,500 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 4,500 mm, total width: 2,500 mm, operation weight: 16,580 kg, additional equipment features: Dual tread, Rear mud guards, Warning triangle, NATO-socket, Equipment: lighting, Hyster H12.00XD-6 from Uniktruck Hodpfxjyb Swcj Ag Nji

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled Hsdsv I A Nljpfx Ag Nji - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Hjdow Sy T Hepfx Ag Noi

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg bucket net weight 430 kg bucket filling weight mindestens 416 kg Hsdpfxsmt Rpwj Ag Nsi bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg .

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 Hodpfx Agjg Ektto Nji -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat, or Uraca. Pump type: 250M P20 Operating pressure: 2,000 bar Flow rate: 34 l/min Drive speed: 1,500 rpm Drive power: 132 kW With EMK electric motor, Hedpfx Agoxmki Ts Noi with pressure control valve, with safety valve. Dimensions (LxWxH): approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the beginning of December 2023. Documentation available.

Condition: excellent (used), Year of construction: 2014, roller (bottom) diameter: 195 mm, roller (top) diameter: 215 mm, working width: 2,050 mm, overall weight: 3,000 kg, total length: 3,700 mm, total width: 1,000 mm, total height: 1,100 mm, power: 7.35 kW (9.99 HP), type of input current: three-phase, Equipment: emergency stop, Rolling capacity 5xD=13 mm Prebend capacity 5xD=9 mm Prebend capacity 1,3xD=7 mm Hsdpfx Ajvl Iaqeg Noi

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Hjdot Iwyuepfx Ag Nji Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate)

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Hodpfowhm S Nex Ag Nei Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: new, Year of construction: 2019, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm Hjdpofxyigjfx Ag Nei distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar