CNC turning and milling center

Hyundai Wia LM1800TTSY

Condition: ready for operation (used), Year of construction: 2021, operating hours: 280 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Kwjdpfx Abjx D Itdjcsw Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Y-axis travel: ±52.5 mm Turret indexing time: 0.11 sec Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Kwsdpfjya Hqbex Abcjw Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring

Condition: used, Year of construction: 2014, functionality: fully functional, Brand: HYUNDAI-WIA Model: LM-1800 / ITSY Category: CNC Turning Center Year of manufacture: 2014 CNC Control: FANUC Series 31i – Model A Machine weight: 8,500 kg Machine Dimensions Length: 4,600 mm Width: 2,100 mm Height: 2,090 mm Working Capacity Max swing diameter over upper/lower carriage: No.1: Ø 290 mm / No.2: Ø 290 mm Max turning diameter (spindle / sub-spindle): No.1: Ø 230 mm / No.2: Ø 230 mm Max turning length: 673 mm Bar capacity (spindle / sub-spindle): Ø 76 mm Axis Travels X1 / X2 axis: No.1: 165 mm / No.2: 195 mm Y axis (upper turret): 100 mm (± 50 mm) Z1 / Z2 axis: No.1: 700 mm / No.2: 720 mm ZB axis: 668 mm C axis (spindle and sub-spindle): 360° Min. programmable angle: 0.001° Main Spindle and Sub-Spindle Spindle speed: 50 – 5,000 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 210 mm Spindle motor power (max/cont.): 22 / 11 kW Turrets Configuration: Turret 1 + Turret 2 BMT-55 Stations per turret: 12 (live tool capable) Total stations: 24 Live tool speed: 5,000 rpm Live tool power: 5.5 kW Tool dimensions: Turning: 20 x 20 mm / Boring: Ø 32 mm Rapid Traverses X1 / X2 axes: 20,000 mm/min Y axis: 7,500 mm/min Z1 / Z2 / ZB axes: 40,000 mm/min Accessories TOP AUTOMAZIONI bar feeder – Fusion model Coolant collection tank with wash pumps Chip conveyor Fixed and driven toolholders Automatic tool presetting arm with M code Manuals, electrical diagrams, and CE Declaration Kodpfx Aboyargujceww Overhauls Carried Out Complete overhaul of turrets 1 and 2 with replacement of seals and bearings Overhaul of X2 and Z2 axis ballscrews with bearing replacement Complete overhaul of the axis lubrication circuit and replacement of pneumatic hoses Overhaul of piece ejector pistons (Z2 unload hand) with gantry replacement Complete interior repainting Replacement of operator side glass Complete overhaul of telescopic covers on all linear axes

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h Kodpeydvfcsfx Abcjww swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 6,600 h, functionality: fully functional, machine/vehicle number: ML0118-000493, turning diameter over cross slide: 670 mm, turning length: 1,285 mm, turning diameter: 420 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,315 mm, total length: 4,530 mm, total width: 2,249 mm, quill travel distance: 100 mm, quill diameter: 100 mm, quill stroke: 1,350 mm, swing diameter over cross slide: 670 mm, turning diameter over bed slide: 720 mm, workpiece weight (max.): 1,000 kg, torque: 1,240 Nm, overall weight: 8,000 kg, bar passage: 102 mm, spindle nose: A2-11, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning machine with driven tools and Y-axis, programmable tailstock (servo-driven), driven tool turret with BMT 65P interface, programmable steady rest holder with steady rest SLUB 3.1, automatic tool measurement arm, coolant gun, SMW power chuck 325 mm and SMW power chuck 400 mm, chip conveyor, Liqui band filter system, various tool holders including driven holders, filter for coolant extraction, programming system for external computer. Kjdpfx Aeydcd Sjbceww

Condition: good (used), The powered tools listed here with VDI 50 interface are designed for a SAUTER tool changer and are in good condition as well as fully functional. They were previously used on a GILDEMEISTER CTX 600 CNC lathe. Kwedpfx Abjbql S Hjcow 6 x driven tools, straight version, brands NACKE and WTO, VDI 50 for SAUTER-brand tool turret: Item No.: XVI 24275 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production. Ksdpfexdwayjx Abceww

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Kwodpeyftfisfx Abcow Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm Kjdpeucgylofx Abcoww diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle motor power: 26 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 2,110 mm, total length: 4,636 mm, total width: 2,035 mm, spindle nose: ASA 11, overall weight: 6,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DOOSAN model PUMA GT3100L" complete with chip conveyor. Kedpfx Ajx N R E Aobcsww