Automatic filling and sealing line for boxes/jars/cans/rigid containers

Indosa Matic 100

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 178 mm Height range: 89 mm - 254 mm Gbsdpfxotqmv Ds Ahlor Production capacity: up to 150 c.p.m. Tooling for approx.: 99 mm (401) or 153 mm (603)

Condition: excellent (used), mileage: 3,67,000 km, power: 463 kW (629.50 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 900 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2015, Equipment: AdBlue, retarder, Color: White Gedsuu E T Aopfx Ahlebr Manufacturer: Mercedes-Benz Type: 4163 SLT 8x4 Chassis number: WDB9634261L922193 Year: 2015 Mileage: 367,000 km Engine: OM473, inline 6, 15.6 l, 460 kW (625 hp), 3000 Nm, Euro 6 Transmission: Mercedes Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch Front axle: 9,000 kg | Leaf suspension | 385/65 R 22.5 Second axle: 8,000 kg | Air suspension | 385/65 R 22.5 Third axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction Fourth axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction GVW: 41,000 kg GCW: 250,000 kg / 500 tons push/pull if used with ballast box (not included) Equipment 900 L fuel tanks AdBlue tank, 60 L 24-volt electrical system JOST sliding fifth wheel, 3.5” New Rockinger R0*56E coupling Gigaspace cab Side skirts Work lights Tool boxes Bull bar with lights Wheelbase: 4,000 mm Axle ratio: I = 5.333 Cabin Sleeper cab Multi-functional steering wheel Cruise control Sun visor 2 x bed Air conditioning TV Leather upholstery Leather comfort seats Coffee maker Fridge drawer Storage boxes Radio / CD player / Bluetooth = Further information = General information Year of manufacture: 2015 Transmission Gearbox: Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch, automatic Axle configuration Front axle: Tire size: 385/65 R 22.5; Max. axle load: 9,000 kg; Steered; Suspension: Leaf suspension Middle axle: Tire size: 385/65 R 22.5; Max. axle load: 8,000 kg; Steered; Suspension: Air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Payload: 500,000 kg GVW: 41,000 kg Functional Body brand: Mercedes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Gbsdpfx Ahoy Szbyjljr

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Gbsdpfx Ahsrzbfcjlsr

Year of construction: 1977, condition: used, Make: Angelus Type: automatic 4 head rotary can clincher (1st operation) Model: 40P Serial no.: 96831077 Gbodpeiauldefx Ahler Build: 1977 Frame: coated mild steel Dimensions: L x W x H = 2500 x 1400 x 2200mm Capacity: up to 12.000 cans per hour Power supply: 380 Volt – 50 Hz – 4,0 kW Features: disc-feed belt-pulley speed regulation machine has a lid magazine Tooling: can size 99 mm

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. Gbjdpfx Asx S Ipwohlsr * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: good (used), machine/vehicle number: 67, mileage: 3,11,489 km, first registration: 01/2019, fuel type: diesel, axle configuration: 6x4, fuel: diesel, emission class: euro6, Year of construction: 2019, Brand: M.A.N. Model: TGS 26.460 6x4 Year of manufacture: 2019 Euro 6 Mileage: 311,489 km Automatic transmission ID no. 67 Gjdpoyuiu Sefx Ahlobr

Condition: reconditioned (used), functionality: fully functional, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries looking to optimize their sterilization processes. Featuring advanced technology and a precise control system, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal product safety while preserving taste and nutritional qualities. This model stands out for its high reliability and large capacity, making it perfectly suited for industrial-scale operations. Additionally, its reinforced stainless steel construction ensures durable corrosion resistance, while facilitating cleaning and daily maintenance. The fully automated cycles deliver consistently reliable results and significantly reduce the risk of human error. Its intuitive control panel, combined with highly flexible programmability, allows you full control over temperature, pressure, and processing time parameters. This makes it easy to tailor each cycle to suit a wide variety of products, including canned goods, ready meals, sauces, and jarred foods. Investing in this autoclave means choosing proven technology that complies with European standards, boosting not only your products’ shelf life but also the overall performance of your production line. Technical specifications: • Vessel diameter: 1550 mm • Maximum temperature: up to 135 °C • Operating pressure: 2 to 2.5 bar • Power supply: 400 V three-phase Gjdpfx Ahsxg Ec Islsbr • Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Condition: excellent (used), mileage: 2,79,179 km, first registration: 02/2009, fuel type: diesel, axle configuration: 8x6, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Roof spoiler - Low noise emission - Speed limiter - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power Take-Off (PTO) - Towing jaw = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 15,928 cc Unladen weight: 15,000 kg Axle Configuration Front axle: Steered Rear axle 1: Steered Rear axle 2: Twin tires Rear axle 3: Twin tires Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request MERCEDES-BENZ ACTROS 4360 V8 SLT 8X6 TITAN HEAVY DUTY TRACTOR UNIT PUSH AND PULL POWER 250 TON EURO 5 L PACKAGE (CAN BE CONVERTED TO EURO 3 FOR EXPORT) V8 ENGINE 600 HP DRIVE 8X6 WHEELBASE 420 CM DIFFERENTIAL LOCKS FIFTH WHEEL + TRAILER COUPLING Gbodpfeuxutnsx Ahlsr HYDRAULICS FOR LOW LOADER LARGE 1000 LITER FUEL TANK BEHIND THE CAB TRANSMISSION WSK 440 RETARDER PUSH AND PULL POWER 250 TONS!!! FRONT PUSH BUMPER EXTRA COOLING PACKAGE OIL AND AIR VALVES FRONT AND REAR TOOLBOXES CAB WITH ALL OPTIONS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Gsdjyk E Srepfx Ahlsbr