Used Mk4 for sale (234)

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg - Serial number: 955 - Drive system: Conventional - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 Rjdpfx Aozrgc Heirsch - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 2,00,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Tailstock retrofitted with automatic cylinder error compensation Rcodpfxozcfnqj Airsh Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Rcjdpfx Ao Aapgzoirjh

Condition: excellent (used), Lot of HSS Twist Drills; Design: HSS; tip drill – steel drill; 118° point angle, drilling depth. Morse taper shank, depending on diameter: MT2, MT3, MT4. Spiral angle 30°. Diameters: see "Pictures" / table. "Dimensions ø" / "Flute length mm" / Total length MT2 ø21.0 120/220mm ___G10 01 → € MT2 ø22.0 90/170mm ___G15 02 → € Rjdpfxey An Izj Airech MT2 ø22.5 150/250mm ___G10 03 → € MT3 ø26.5 150/275mm ___G15 04 → € MT3 ø28.0 150/275mm ___G15 05 → € MT3 ø31.0 150/275mm ___G15 06 → € MT4 ø34.0 150/300mm ___G15 07 → € MT4 ø36.0 160/310mm ___G15 08 → € MT4 ø39.0 130/270mm ___G15 09 → € The G10–G15 numbers are internal references. Package price: on request More twist drills will be available soon in my other listings! You will receive an invoice, listed price = Net price incl. 19% VAT. Packaging & shipping within Germany €11.00 International shipping on request. If you have any questions, feel free to contact me: 0171/8082406 The original pictures are part of the item description. Please also check my other offers. Collection, shipping, bank transfer and PayPal possible.

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete Rodpfx Aiszd R Ecersch -Transport dimensions: 520/400/H80 mm -Weight: 27 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: extensions / adapter sleeves MK6 Redpfxjx R Sy Ro Airoch -Type: SWN 136/29 MK6-MK6 / MK6-MK5 / MK6-MK4 -Dimensions/Quantity: see photos -Transport dimensions: 500/480/H95 mm -Weight: 50.7 kg

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 530 mm, turning diameter: 255 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, rotational speed (max.): 4,000 rpm, type of input current: three-phase, bar passage: 65 mm, chuck outer diameter: 210 mm, Equipment: documentation/manual, For sale is our well-maintained CNC turning center, a Hyundai WIA L210 LMA, manufactured in 2018, from our production facility. Technical data: Spindle bore: 65 mm Max. turning diameter: 255 mm Max. turning length: 530 mm Turning chuck: Samchully, 210 mm Main spindle speed: 4,000 rpm, 22/18.5 kW Control system: Siemens 828D C-axis Tool turret VDI 40, 12 stations, driven tools (5,000 rpm) Coolant pressure: 4.5 bar Tool presetter: Q-Setter Part catcher Rjdpfx Aoz Smd Rjiroch Preparation for bar feeder magazine Chip conveyor Tailstock MK4 The price includes an extensive tool package: 6 driven tools with internal cooling (3 of which are angled at 90°) 7 holders for turning tools and drill bars 2 sets of soft jaws for the above-mentioned chuck Condition: well-maintained, from ongoing production, technically flawless. Dismantling and loading can be arranged.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Rcsdpfjz Rlkxex Aireh Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, adjustable machine reamer Rodpeyz Imhefx Airjch -Diameter: Ø 62 mm -Recording: MK4 -Dimensions: Ø 62 x 455 mm -Weight: 4.3 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 21 pieces -Type: Reducing sleeve MK4/3 -Dimensions: Ø 32/140 mm -Price/Fee: complete Redpfez Il I Rex Airsch -Transport dimensions: 160/160/H140 mm -Total weight: 8.4 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 11 pieces -Type: Reducing sleeve MK4/1 -Dimensions: Ø 32/125 mm -Price/Fee: complete -Transport dimensions: 175/60/H125 mm -Total weight: 5.5 kg Rjdpoz Il Hmefx Airoch

Condition: used, Quick-change drill chuck with inserts for holding drilling, reaming, countersinking, and threading tools. Tool holder - quick-change holder - quick-change chuck Redjz It Rmspfx Airech Type SF 46 MK4 presumably a West German product similar to BILZ / MAYSSO Tool holder: MK4 - only suitable for vertical use (sleeve is locked by its own weight) - suitable for clockwise and counterclockwise rotation Insert sleeve diameter: 46 mm 3 pieces of insert sleeve MK2, length = 105 mm 3 pieces of insert sleeve MK3, length = 109 and 122 mm 3 pieces of insert sleeve MK4, length = 135 mm - Quick-change system for drilling and radial drilling machines as well as CNC drilling machines - various operations can be performed with very quick tool changes in a single workpiece setup - with dual ball clamping system for secure torque transmission and play-free seating of the inserts in the chuck - Not suitable for radial loads, e.g., milling, and tensile loads, e.g., back-countersinking. Weight: 14 kg good condition The inserts can be quickly changed without any auxiliary tools and are automatically locked when inserted into the chuck. The inserts are unlocked by axially shifting the switching sleeve. The tool change can be performed with the spindle both stationary and rotating. Short insertion and retraction distances of the inserts allow for tool changes in seconds. The quick-change system can be used vertically for both clockwise and counterclockwise rotation.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification Rcodpfxoz R Dn Ao Airoh -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop -Multifix base and inserts -Coolant system -Chip guard -Work light -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Rsdpfoz Il E Nex Airoch -Morse taper sleeve: MK4 11 pieces -Type: Reducing sleeve MK4/2 -Dimensions: Ø 31/125 mm -Price/Fee: complete -Transport dimensions: 175/60/H125 mm -Total weight: 4.4 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg Rcjdpfx Aoxrlt Rsirsh

Condition: used, functionality: limited functionality, Year of construction: 1990, operating hours: 3,602 h, load capacity: 7,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: mono, motor manufacturer: Ford, gearing type: automatic, fork length: 1,600 mm, overall weight: 8,900 kg, Equipment: Telescopic boom, overall height: 3000, lifting height: 4000 mm, load capacity: 7000 kg at a load center of 600, fork length: 1600 mm, work lights front and rear, half-cab, Ford diesel engine, transmission: torque converter, 4x SE tires, operating manual included. INSPECTION AND TEST DRIVE: Available at any time during opening hours by prior appointment: Monday to Friday. From 8:00 AM to 6:00 PM. Saturday from 8:00 AM to 1:00 PM. TRANSPORT: Redpjzifcmefx Airoch Low-bed trailer or covered truck available at a reasonable price.

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm Rcodpfx Aijcpbwbersh -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,100 mm, measuring range Y-axis: 1,100 mm, measuring range Z-axis: 750 mm, table load: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range, X-axis: 1,100 mm Measuring range, Y-axis: 1,100 mm Measuring range, Z-axis: 750 mm Rcjdpfx Aezy Ezdeireh Travel length, X-axis: 1,100 mm Travel length, Y-axis: 1,100 mm Travel length, Z-axis: 750 mm Max. traverse speed: 350 mm/min Table length: 2,050 mm Table width: 1,100 mm Max. workpiece weight: 2,000 kg Table load: 2,000 kg Distance between columns: 1,100 mm MACHINE DETAILS Input current type: Alternating current (AC) Input voltage: 400 V Compressed air connection: 6 bar Operating pressure: 6 bar Operating temperature: 22 °C Ambient temperature: 16–30 °C Dimensions & Weight Dimensions (L x W x H): 2,050 x 1,890 x 2,700 mm Total weight: 2,800 kg Year of last overhaul: 2013 EQUIPMENT Virtual DMIS Software V7.0 OnMotion Upgrade Kit with Servo Tower, Joystick Box, and interface cables PC with OnMotion hardware and Virtual DMIS V7.0 5 used TP20 measuring probes Documentation / Manual Nameplate Note: Due to age, the cables between the machine and the controller are stiff and brittle. Disconnecting and transporting them may result in the need to replace individual connection cables or connectors. However, this can be done easily with some knowledge.

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 Redpfx Aisrvldueroch -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 Rcedsu S Tc Ejpfx Airoh -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, total height: 1,600 mm, total length: 2,750 mm, total width: 1,340 mm, overall weight: 2,000 kg, spindle nose: A2-6, Equipment: documentation/manual, Spindle bore: 66 mm Spindle nose: A2-6 Spindle speed: 30~2500 rpm SIEMENS 808D Advanced control system SIEMENS servo drives Frequency-controlled main spindle motor (5.5 kW) Hydraulic chuck, 200 mm, with hydraulic unit Hydraulic tailstock Automatic turret with 8 stations (20x20 mm) SIEMENS electrical components Redpfozzcyasx Airjch MK4 live center Cooling system Automatic lubrication system Electronic handwheel LED work light Machine body made of cast iron Door switch 3-color warning light

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Rcsdpfxsvxf U Ee Airjh Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Condition: excellent (used), Year of construction: 1979, machine/vehicle number: Masch. Nr.3650, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, type of input current: three-phase, tool diameter: 32 mm, spindle mount: MK 4, actuation type: electric, total height: 187 mm, throat depth: 300 mm, overall weight: 430 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Well-maintained ALZMETALL pillar drilling machine AB 35 S, machine no. 3650 Flange spindle, MK4 Overhang 300 mm Rcsdpfezicxrex Airoh Spindle stroke 160 mm Spindle speed 55-1500 rpm, stepless Spindle speed via 2 gear stages Drilling capacity 32 mm in steel, 45 mm in cast iron Space requirement 1.3 m x 0.9 m Height 1.87 m Weight 430 kg Collection only, cash payment only.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, OPTIMUM OPTIdrill DH 40 GP geared drill press – in top condition – used sparingly For sale is a high-quality OPTIMUM OPTIdrill DH 40 GP geared drill press in very well-maintained condition. The machine comes from a private workshop and has only been used occasionally; it is not a production machine intended for continuous use. It functions perfectly and can, of course, be inspected and tested on site. Technical data: - Manufacturer: OPTIMUM - Model: OPTIdrill DH 40 GP - Drilling capacity in steel: 40 mm - Geared drill press with mechanical speed change - Automatic quill feed - Right/left rotation - Precise column and solid worktable - MK4 spindle mount - Coolant system (if available) - Operates on 400 volt three-phase power Condition: - Technically perfect - Very well-maintained Rcodpfxsztl Tmj Airjh - Low operating hours - No backlog of repairs - Ready for immediate use The quality of OPTIMUM is well-known in the professional sector. The DH 40 GP is a stable, durable machine with high precision. New price: 3,804 Inspection: The machine can be inspected and tested under power by appointment. Loading can be assisted upon agreement. Private sale, no warranty or returns.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Rcsdpfx Aijxwmf Sjroh Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.