Servo Controller

Indramat SM 4.7/20-GC16 T161-902

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t +++++ Please note: Pgjdpfeiqu S Ejx Aa Deg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm Pjdjxn Ty Rspfx Aa Dsgg centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Pgjdsvrxd Hepfx Aa Deg Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: good (used), functionality: fully functional, Between centers: 1500 mm Turning diameter above bed: 500 mm Turning diameter above support: 300 mm Turning diameter in pocket: 700 mm Spindle bore: 72 mm Spindle speeds: 18 pieces, 11-2000 RPM Pgodpfx Aaju Tt S Nj Dog 3 jaw chuck, 4 jaw chuck, Fixed and moving steady Cooling 1-axis Digital readout on workpiece diameter

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Pgedpfowgc Udox Aa Deg Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Pgodpfxsvamqde Aa Djg

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Pgsdpfx Ael Hxmdoa Djg

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Pgjdpeu Idbyefx Aa Dog Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: excellent (used), - Atmospheric pressure - Tanks for the fermentation and storage of wine or beer Pedpfx Asrigczja Dogg - Dome 400 mm made of AISI 304 stainless steel - Nitrogen connection with stainless steel 3/8" ball valve - Cleaning line with DIN 32 connection - AISI 316 stainless steel cleaning ball Ø 65 mm - Level indicator with return flow into the container - Sampling - Bottom conical 30° - Residual drain Disc valve DIN 25 - Clear drain Disc valve DIN 25 - Bimetal thermometer made of stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable feet in stainless steel - Dimensions: Ø 800 x 1950 mm (h) - High-gloss polished inside, marbled outside

Condition: excellent (used), Stainless steel tank 2 m3 Pgodpfeq U Aufsx Aa Deg