Used Dmt for sale (20)

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Hfedpfxsxgdfbo Aaben Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Hfodpfx Ajxlza Hjaben Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1000 / 1500 / 2000 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm Hjdpfx Aswgn Agjabsfn turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck Hodjxhqqmepfx Aabefn approx. 74.000h "machine on" *

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Hfodpfxewtg H Ro Aaben

Condition: good (used), Year of construction: 2008, operating hours: 7,840 h, functionality: fully functional, machine/vehicle number: 3212.08, turning diameter over cross slide: 260 mm, spindle bore: 106 mm, turning length: 2,000 mm, turning diameter: 475 mm, center width: 2,000 mm, turning diameter over bed slide: 475 mm, CNC LATHE – Cycle Lathe CD480 Manufacturer: DMT Kern Model: CD480 x 2000 Control: HEIDENHAIN "MANUALplus 620" Year of manufacture: 2008 Condition: Good / Very good Operating hours: 7,840h Scope of delivery: - Original documentation - Tailstock - Automatic twelve-position turret with driven tools Tool mounting DIN 69880, Q5 30mm, mounted on the rear cross-slide - Additionally, Multifix B at the front Hsdpfx Aaow Exlvobefn - Main spindle with DIN 55026/A8 mount, bore 106mm, spindle bearing diameter at the front 140mm - Special speed range, max. 2,500 rpm - Fixed steady rest with roller jaws - … and many other factory-fitted special features (see description) - Tool holders, various lathe chucks, mounts for the tool turret, driven tools etc. can be purchased as an extra package and are not included in the main machine delivery!

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Spindle power 16 kW Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Hfodpfx Aaewu Dq Aobon Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min.

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Hfsdju A Ducepfx Aabsn Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg Hfsdpjn Tvb Sjfx Aabsn

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm Hodpfxor U Skhj Aabofn turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor *

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 Hfedpfxer D Nmyj Aabsn - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 6414.21, turning diameter over cross slide: 420 mm, spindle bore: 64 mm, turning diameter: 420 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 210 mm, center height: 210 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 140 mm, quill diameter: 60 mm, total length: 2,150 mm, total width: 1,150 mm, total height: 1,700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, Equipment: rotational speed infinitely variable, The machine is faultless and has had no previous repairs, with very low operating hours. Hjdpfxowcdhdj Aabsfn The lathe can be operated both conventionally and via servo drives. The control system allows programming via DIN commands, making it ideal for small batches and training. Sale due to misjudgment of the required technology: we have a growing need for a CAD/CAM-programmable cycle lathe. Please refer to the photos/description for the type, model, year of manufacture, and operating hours. Price: €50,000 (negotiable) based on a new price of approximately €76,000. Transport of the machine is not included in the price and is subject to negotiation. The center shown in most photos is not included in the offer; it is listed in the accessories list! Extensive accessories are listed in the Word document. The machine is available for immediate sale.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device Hfjdpfx Aaon Tvcdobon -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Condition: used, Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V Hjdpfx Aasfrltqsbefn -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Hodpfen Tvbvox Aabjfn -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0314-028 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Year of construction: 1997, condition: used, CNC control, control panel, machining center Hfjden Tvbyopfx Aabsn -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Monitor: Asus -Dimensions: 620/120/H370 mm -Weight: 50 kg

Year of construction: 1997, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe Hfjdjn Tvb Depfx Aabon -Type: TDA1.3-100-3 API -Item: 244599 K41/96 -Dimension: 325/150/H390 mm -Weight: 10.8 kg

Year of construction: 1996, condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor Hsdpfxepb Eawj Aabjfn -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil in-line pump Hjdpfx Aajn Tvbkebsfn -Manufacturer: Kopa, OIL central lubrication pump oil inlet pump from lathe DMT CD320 -Type: 010 Single Line Delta -Container contents: l -Flow rate: l/min / bar -Dimensions: 210/135/H275 mm -Weight: 6 kg

Year of construction: 1997, condition: used, CNC control, control panel, machining center Hsdpsn Tvbnofx Aabofn -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Limit switch: Balluf BNS 519 -Dimensions: 500/500/H210 mm -Weight: 11.4 kg