Metal band saw with hydraulic feed

Jaespa AS 4

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Psdpfx Abev T Th Ns Ijrd Steel and metal band saw with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: good (used), Width: 700 mm Length: 2000 mm Panel thickness: 40 mm Prsdpfsvitcljx Ab Ied Height: 850 mm

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. Pedpfx Absua D Alo Iord ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge Pedpfsgg N Hbjx Ab Ierd - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Condition: new, axle configuration: 2 axles, total length: 5,250 mm, total width: 2,300 mm, total height: 1,000 mm, color: red, Year of construction: 2025, Carrying capacity: 24.000 kg Tyre size on axle 1: 24R20.5 Tyre size on axle 2: 24R20.5 Tyre size on axle rear: 24R20.5 Pjdpfx Abov R I Nvj Ijrd

Condition: new, Year of construction: 2025, BECO - MAXXIM 260 Tandem Earthmoving Tipper Trailer Specifications: Technical carrying capacity: 26t Water volume: 13.3m³ With headboard: 17.2m³ Body dimensions: 5,550 x 2,300 x 1,000 mm (L x W x H) Bottom and side walls: 6mm / 400HB wear-resistant steel Improved unloading properties due to conical design Detachable front bulkhead Tailgate: Double-acting hydraulic cylinders Tipping Cylinder: 5-stage / Capacity 37 liters Cardanic mounting Hose rupture valve Max. tipping angle: 60 degrees Tandem Axle (Pendulum Tandem): BPW axles; 10-bolt, 150x150mm, brake drum Ø410x180mm Heavy-duty pendulum axle with grease-lubricated interchangeable bushings Brake levers with fine adjuster Drawbar: Hydraulically suspended drawbar TCS (Triple Comfort System) Manual leveling/height adjustment via tractor hydraulics K-80 ball coupling eye (flange type) Double-acting hydraulic support leg with internal cylinder Hydraulic hand pump for support leg Access step with anti-slip profile ALR Valve: Automatic Load-dependent Brake Force Regulator (hydraulic) Integrated in drawbar suspension Lighting: Round 3-chamber LED rear lights Front chassis marker reflectors (white) Prodpfx Asv Anupjb Iod Side reflectors on chassis (orange) COVER SYSTEM Aluminum cover flaps Type: Folding Cover-HV (High-Volume) Double-acting drive with closed casing (HYVA system) Supplied without rear so-called asphalt hatch Operation via tractor hydraulics (double-acting function) STEERING SYSTEM Hydraulic forced steering on rear axle of tandem Control rod position: right in driving direction Overpressure protection via pressure relief valves Electric/hydraulic alignment control Automatic setting of pre-tension in steering circuits Manual steering/adjustment of steering axles possible Hydraulic functions integrated in valve block Control rods equipped with K-50 ball coupling eye K-50 supplied with insert with left-hand thread LIGHTING Double round 3-chamber LED rear lights 2x LED work lights at rear chassis (powered via 54G) 2x LED work lights at front chassis on width marker supports (powered via 54G) Step Mudguards Reversing alarm (acoustic) Plastic toolbox Protective grilles for rear lights Shovel holder on front wall of body Tyres: Brand: BKT Profile: 693 RIDEMAX Size: 710/50R30.5 RDW Package: Drawbar eye with E-approval 2-line air brake system Parking brake by spring chamber cylinders Manual brake force regulator (3-stage) Rear under-run bar Side lighting (LED) mounted to chassis License plate holder with lighting IGC (Individual Certification of Approval) BECO MAXXIM 260 Body dimensions: 5,550 x 2,300 x 1,000 mm internal Tyres: BKT 710/50R30.5 693...

Condition: used, Powder Coating Plant - Automatic Prjdpfxev Npa He Ab Ied The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs.

Condition: used, Eldan Granulator HG129 Prsdpfx Abst Uyvrs Isd

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: Prodpfxsvmmrus Ab Isd - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: new, ELMAG universal lathe PREMIUM CU 630 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 Pjdpfx Ajt Hhbyjb Ierd - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6 pieces - Machine shoe Ø 160 mm, 6 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 2000 mm Center height 315 mm Turning diameter over bed 630 mm Turning diameter over carriage 430 mm Turning diameter without bridge 830 mm Machine bed width 400 mm Cross slide travel 315 mm Top slide travel 130 mm Turning tool cross-section, max. 32x32 mm Lathe chuck holder (DIN 55027) no. 11 Spindle holder (turning spindle) 120 mm Spindle bore 103 mm Speed range 1, infinitely variable 16 - 63 rpm Speed range 2, infinitely variable 63 - 250 rpm Speed range 3, infinitely variable 315 - 1250 rpm Longitudinal feeds (120) 0.04 - 12 mm/rev Transverse feeds (120) 0.02 - 6 mm/rev Metric thread dimension (64) 0.5 - 120 mm Metric modular thread (64) 0.125 - 30 mm Inch thread, threads G (64) 60 - 1/4 G/' Inch modular thread, threads G (64) 240 - 1 G/' Quill holder MK 5 Quill diameter 90 mm Quill stroke 230 mm Motor power 11000 W Mains connection 400/50 V/Hz Length (total) 3600 mm Height (total) 1400 mm Weight 3310 kg