Pick & Carry Crane

JMG MC 400

Condition: used, total length: 6,042 mm, Year of construction: 2026, load capacity: 40,000 kg, Crane JMG MC 400S Drive Electric Year built 2026 Lifting weight (kg) 40,000 Fjdpszupwrjfx Ap Degh

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - Max. working length 3060 mm - Distance between uprights 2690 mm - Max. pressing force 1300 kN - Max. distance between table and ram 370 mm - Upright overhang 410 mm - Ram stroke 215 mm - Stroke speeds: - Downward speed (idle) max. 200 mm/s - Upward speed 135 mm/s - Downward pressing speed 1 to 11 mm/s Fgodpex Ew Dqofx Ap Djh - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - Including: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning device - Controlled back gauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Machine does not perform referencing because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: new, total length: 6,042 mm, Year of construction: 2024, load capacity: 40,000 kg, - Vorderachse Antrieb mit gegenläufiger Bewegung - proportional ausfahrbarer hydraulischer Ausleger - Lenkung 180° über Hinterachse - abnehmbare Kontergewichte - maximale Tragkraft in kg 40.000 Fodjz A Ic Hopfx Ap Djgh - Antrieb: Vorderradantrieb N°2 Elektromotoren AC 12 kW, 96V. Isolationsklasse H - Eigengewicht Kg. 33.500, Abnehmbare Kontergewichte Kg. 10.700 - Batterien: 96 V - 1395 Ah, 8 Arbeitsstunden - Vorne: n.4 cushion 840x350x559”, Hinten: n.4 superelastich 355/50-20” - Lenkung: über die Hinterachse Lenkwinkel 90°/90° - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Auslegerwinkel +65°/-3° - Elektropumpe: 1x35 kW - 96 V AC, 1x23 kW - 96 AC

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Fgjdpjxacfmjfx Ap Dsh Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Fedpfx Aew U U Udep Dsgh Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Fjdpfx Aponqzt Aj Djgh Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, Column lift rotating device, 15 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set, synchronized, or individually. Protec reversing device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically powered (at extra cost). Lifting capacity 15,000 kg, 360°. Torque 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotating drive: 2 x 2.2 kW. The price refers to one unit with an electric carriage, including. The second unit as a set is 20% cheaper. Fgodow Nilaepfx Ap Deh Available with a universal joint flange (cardan flange) upon request.

Condition: new, empty load weight: 8,000 kg, maximum load weight: 80,000 kg, overall weight: 88,000 kg, axle configuration: 4x2, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 1,100 mm, suspension: hydraulics, color: light blue, Year of construction: 2025, operation weight: 88,000 kg, Heavy-duty industrial transport trailer with hydraulic lift Fgsdpfeva E Tkox Ap Dsh eight axles that hydraulically raise and lower the trailer via a control valve all-wheel steering can be coupled on both sides, at front and rear transport floor made of 50 mm Douglas fir or without floor according to customer requirements optional with hand brake or air brake system optional lighting system on both sides further information available upon request.

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Fgsdpsy Anuhofx Ap Dsh

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Fgjdpstvfcmefx Ap Dsh