Crane truck

Volvo FH 500 8x4 / FASSI F2150 / WINCH / WORK BASKET

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Bdodpfx Afet N Antj Ajh Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: excellent (used), mileage: 68,912 km, power: 374 kW (508.50 HP), first registration: 05/2024, fuel type: diesel, tire condition: 50 %, axle configuration: 8x2, wheelbase: 7,450 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 11,300 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, crane, trailer coupling, = Additional options and accessories = - Air conditioning (automatic) - Cabin - Power take-off (PTO) - PTO - Sun visor = Remarks = Crane Number of hydraulic extensions: 15 Number of support legs: 5 Remote control: ✓ Load Hook: ✓ Winch: ✓ Very beautiful original Dutch Volvo FH540 configured as a crane truck, directly from the first Dutch owner! In addition to the options already mentioned, it features: -8x2 -Widespread GVW 41500kg -Load capacity 11786 kg -Hiab IQ 1188 PRO -9x hydraulic -Fly jib 1550Q-6JDC -6x hydraulic -Front stamping -Winch -catching mouth -Loading platform with round holes and stainless steel etc etc Available immediately = More information = General information Number of doors: 2 Registration number: 72-BXV-6 Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Axle configuration Front axle 1: Max. axle load: 10000 kg; Steering; Tyre profile left: 50% Front axle 2: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 1: Max. axle load: 11500 kg; Tyre profile: 50% Rear axle 2: Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile: 50% Weights Empty weight: 29.814 kg Carrying capacity: 11.786 kg GVW: 41.500 kg Max. towing weight: 50.000 kg Functional Crane: Hiab IQ118 E-9 FLYJIB 6S LIER!!, year of manufacture 2023, behind the cab Maintenance APK (MOT): tested until 06/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Bdsdpfx Afezuc S Ne Aoh Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, machine/vehicle number: 050189, for groove width: 13 - 30 mm for groove depth: 22 - 35 mm Bodpfx Asb Amlhsf Asdh milling cutter speed: approx. 1200 rpm drive motor: alternating current 220 V, 1020 W weight: approx. 6 kg

Condition: excellent (used), mileage: 63,297 km, first registration: 08/2006, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, emission class: euro3, Year of construction: 2006, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, retarder, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Low noise - Speed limiter - Air horn - Reversing camera - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Further Information = Drivetrain Drive: Wheel Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tyres Rear axle 2: Twin tyres Weights Unladen weight: 31,580 kg Operational Mast length: 57 m Lifting height: 5,700 cm Working height: 5,700 cm CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA P420 8X4 + BISON PALFINGER TKA 57 KS ACCESS PLATFORM EURO 3 L PACKAGE 420 HP DRIVETRAIN: 8X4 LEAF SUSPENSION WHEELBASE: 450 CM MANUAL TRANSMISSION RETARDER TRAILER COUPLING CAMERA AIR CONDITIONING BISON PALFINGER TKA 57 KS ACCESS PLATFORM Bdjdpfsxphtnex Af Ajh 4X OUTRIGGER STABILISERS MAX WORKING HEIGHT: 57 METRES!! MAX OUTREACH: 41 METRES WITH MAX 350 KG LOAD IN BASKET LOWER CONTROLS BASKET CONTROLS 3-MAN BASKET + 110 KG POWER SOCKET IN BASKET COMMUNICATION SYSTEM IN BASKET HYDRAULIC OIL COOLER MULTIPLE TOOLBOXES HATZ ENGINE TYPE 1B40T-X CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design for optimized loading area length, approximately 3,700 mm long Bdjdpfx Ajk Aht Usf Aoh -Gooseneck with rear bevel approximately 1,000 mm x 10° Loading Platform: -Loading platform in extendable design, approximately 8,800 mm long, with bevel at the rear approximately 500 mm x 10° -Recess in the loading platform and into the bevel for accommodating the excavator arm -Pneumatic locking system with tapered locking pins and reinforced locking positions -Hardwood decking on the bevel of the loading platform Ramps: -1 pair of two-part steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm -Ramps with hardwood decking -Hydraulically folding ramp ends -Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 215 mm -Square ladder strips 20 x 30 mm, approximately every 200 mm on the outer frame of the ramp Axles and Suspension: -BPW axles and suspension, 1st axle with steering knuckle, all other axles with hydromechanical forced steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Tires 235/75 R 17.5, twin tires -TPMS tire monitoring system according to ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheel Included accessories: -Steel front wall, plug-in, approximately 400 mm high -3kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches -Parking position on the gooseneck for the warning signs when not in use -1 spare wheel -On the gooseneck, 1 pair of plug-in aluminum sideboards, approximately 400 mm high, anodized -On the gooseneck, 1 plug-in aluminum rear wall, approximately 400 mm high, anodized -Approximately 40 mm thick hardwood decking above the gooseneck, checkered plate decking above the kingpin -2" kingpin -Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide -4 chock blocks -Mechanical landing gear with 2-speed gearbox and crank -JOST Module B – static test load = 50,000 kg -1 intermediate table, approximately 300 mm wide -Extensions (galvanized), extendable by approximately 230 mm on each side -Wheel recesses with square ladder strips -Aluminum covers for the wheel recesses -1 pair of mechanical rear supports -Steering assistance at the front and rear, operable via cable remote control, with single-axle monitoring -1st axle with automatic lift axle function -Central lubrication system with 1 pump, brand BEKAMAX -Wireless remote control for operating the steering assistance, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle monitoring -Wabco Smart Board system -4 warning signs, approximately 423 x 423 mm, extendable by approximately 400 mm, incl. 2 position lights and mounts for rotating beacon

Condition: used, mileage: 1,27,000 km, power: 353 kW (479.95 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro6, Equipment: crane, soot filter, Crane: ----- Retarder – Air conditioning – Steerable axle – Fifth wheel coupling and outriggers – Fassi 990, year of manufacture 2015, 8 extensions and fly jib – Front support – 8,200 crane operating hours – Manual transmission Bsdpfoz E Ugqex Af Asdh Suspension: Leaf spring – Air suspension

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device Bsdpsxn A Spsfx Af Aedh • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), mileage: 1,55,000 km, power: 405 kW (550.65 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, operating hours: 5,524 h, Equipment: ABS, low noise, navigation system, trailer coupling, = Additional options and accessories = - Power brake booster - Air suspension - Air-suspended seats - Reversing camera - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) - Towing jaw Bodpfxjx Ahwte Af Aodh = Further information = General information Year of manufacture: Jan. 2016 Axle configuration Front axle 1: Steered Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Weights Unladen weight: 22,215 kg Payload: 18,785 kg Gross vehicle weight (GVW): 41,000 kg Functional Crane: Yes Body brand: EFFER 525/6S + JIB 4S CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Condition: excellent (used), mileage: 75,315 km, power: 397 kW (539.77 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 10x4, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - Low-noise - Speed limiter - Refrigerator - LED lighting - Air suspension - Air horn - Media system - Particulate filter - Reversing camera - Sun visor - Stability control - Auxiliary heater (parking heater) - Toolbox - PTO (power take-off) - Towing hitch = Further Information = Transmission Transmission: I-Shift, automatic Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Weights Curb weight: 38,840 kg Functional Mast: Telescopic (14 sections) Mast length: 40.6 m Lifting capacity: 24,490 kg Lifting height: 4,060 cm Crane: FASSI F1650RAL.2.28 + JIB L616L, mounted behind cab Body manufacturer: FASSI F1650RAL.2.28 + JIB L616L CE marking: yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request VOLVO FH 540 10X4 WITH FASSI F1650RAL.2.28 CRANE + JIB L616L + WINCH EURO 6 | PACKAGE 540 Hp DRIVE 10X4 TRIDEM LAST AXLE LIFT AND STEERABLE WHEELBASE? CM 10 TONNES PER AXLE AIR SUSPENDED FH SLEEPER CAB WITH AIR CONDITIONING, NAVI, CAMERA I-SHIFT AUTOMATIC TRANSMISSION TRAILER COUPLING Bdsdpfxeyiunaj Af Aoh MANY TOOLBOXES FASSI F1650RAL.2.28 CRANE + JIB L616L 2X OIL COOLER FOR CRANE HYDRAULICS TOTAL 14X HYDRAULICALLY EXTENDABLE MAX WORKING HEIGHT 40.6 METERS!! MAX LIFTING CAPACITY 24,490 KG MAX LIFTING CAPACITY AT 36.2 METERS 970 KG CRANE CAN WORK IN FRONT OF CAB VIA 2X FRONT STABILIZERS TOTAL 6X STABILIZERS? CHASSIS 100% EXTRA REINFORCED? LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS RADIO REMOTE CONTROL OPEN LOAD PLATFORM PLATFORM LENGTH? CM + ? CM HYDRAULICALLY EXTENDABLE, TOTAL LENGTH ? CM HOOK EYES AND TWISTLOCK CONTAINER PINS FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL #geurtstrucks

Condition: used, mileage: 2,04,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, traction control, = Additional Options and Accessories = - Remote central locking - Air suspension - Hub reduction - PTO Bjdpfx Ajyxn S Eef Asdh - Radio - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Copma 1150.8 JIB J6 Year 2018 Winch. Hydraulic outriggers. Hydraulic extensions 8 + 6. Scanreco radio remote control. 4.52 m - 19,400 kg. 6.10 m - 14,100 kg. 7.72 m - 10,800 kg. 9.47 m - 8,500 kg. 11.22 m - 7,000 kg. 13.82 m - 5,700 kg. 15.20 m - 4,900 kg. 17.15 m - 4,300 kg. 19.52 m - 3,760 kg. 22.50 m - 2,450 kg. 23.90 m - 2,300 kg. 25.50 m - 2,030 kg. 27.20 m - 1,510 kg. 29.00 m - 1,180 kg. 30.90 m - 960 kg. 32.80 m - 720 kg. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW: 37,000 kg Functional Crane: Copma Financial Information Price: Upon request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We strive to provide accurate information. However, no rights can be derived from the information provided.