Diesel Forklift

Jungheinrich DFG550s

Condition: used, machine/vehicle number: IC1149, Year of construction: 2017, operating hours: 9,443 h, load capacity: 5,000 kg, lifting height: 3,500 mm, construction height: 2,500 mm, enginetype: Diesel, manufacturer: Jungheinrich Pedpow R D Ifefx Akfsgk

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Pedpfxou U Hm Ao Akfsgk Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: refurbished (used), Year of construction: 2017, operating hours: 7,757 h, load capacity: 5,000 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 3,050 mm, fork length: 1,200 mm, empty load weight: 6,961 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and the latest safety standards – delivering maximum quality and safety. From chassis to battery, through to drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test on site and receive expert advice – we’ll help you find the right solution. Industrial truck data: Manufacturer: Jungheinrich Type: Counterbalance Forklift DFG 550s Drive: Diesel Pgsdpfxsywz S Ne Akfok Load capacity: 5,000 kg Year: 2017 Operating hours: 7,757 Lift height: 4,500 mm Mast type: Duplex Free lift: No Overall height: 3,050 mm Fork length: 1,200 mm Unladen weight: 6,961 kg Load centre: 500 mm Tyres: Solid rubber Model: DFG 550s Cab type: Full cabin – front, roof & rear window + steel doors (suspended) Cab equipment: Solopilot control unit Cab equipment: Adjustable cabin heating Cab equipment: Adjustable cabin air conditioning Lighting: 2x front work lights Lighting: Rotating beacon Attachment: Side shifter Attachment: Additional hydraulic circuit – routed to fork carriage

Condition: refurbished (used), Year of construction: 2013, operating hours: 11,381 h, load capacity: 5,000 kg, lifting height: 3,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, fork length: 1,150 mm, empty load weight: 7,461 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Stringent technical inspection ✔ 400+ vehicles available Podpfx Aksw Hhgxefegk ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and consult on site now – we will find the right solution for you. Industrial truck specifications: Manufacturer: Jungheinrich Type: Counterbalance Forklift DFG 550s Drive type: Diesel Load capacity: 5,000 kg Year of manufacture: 2013 Operating hours: 11,381 Lifting height: 3,500 mm Mast type: Duplex Overall height: 2,500 mm Fork length: 1,150 mm Unladen weight: 7,461 kg Load centre: 600 mm Tyres: Solid rubber Model type: DFG 550s Cab type: Full cabin - front, roof & rear window + steel doors (suspended) Cab equipment: Solopilot control unit Attachments: Sideshifter Attachments: Fork positioner 560 mm to 2,060 mm Attachments: Additional hydraulic circuit routed to fork carriage

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Pgsdew Dfhzjpfx Akfjk

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Pjdpoxg D A Hsfx Akfjgk

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Pgsdpfx Aoul Svljkfek Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Pedpfxsw Rpd So Akfsgk Price is without VAT.

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm Pjdpfx Ash Agnuekfsgk f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Podpfxeyucf Re Akfogk Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret