Diesel Forklifts

Jungheinrich DFG 550s

Year of construction: 2015, operating hours: 6,366 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 3,000 mm, free lift: 1,500 mm, mast type: duplex, drive type: Diesel, load capacity: 5,000 kg, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Condition: 80 - 100% Gbodpfxou Uwf Ns Ah Heg Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab, full free lift,

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Gedpfedrc Txox Ah Hjbg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: refurbished (used), Year of construction: 2013, operating hours: 11,381 h, load capacity: 5,000 kg, lifting height: 3,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, fork length: 1,150 mm, empty load weight: 7,461 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Stringent technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices Godsw Hhgxopfx Ah Hobg ✔ Personal support – even after purchase Test and consult on site now – we will find the right solution for you. Industrial truck specifications: Manufacturer: Jungheinrich Type: Counterbalance Forklift DFG 550s Drive type: Diesel Load capacity: 5,000 kg Year of manufacture: 2013 Operating hours: 11,381 Lifting height: 3,500 mm Mast type: Duplex Overall height: 2,500 mm Fork length: 1,150 mm Unladen weight: 7,461 kg Load centre: 600 mm Tyres: Solid rubber Model type: DFG 550s Cab type: Full cabin - front, roof & rear window + steel doors (suspended) Cab equipment: Solopilot control unit Attachments: Sideshifter Attachments: Fork positioner 560 mm to 2,060 mm Attachments: Additional hydraulic circuit routed to fork carriage

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Gbsdporl Utbefx Ah Heg Trimming Unit: yes Max Panel Length: 55 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Gbjdpsq Ehpaefx Ah Hsg Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: itj797495, power: 11 kW (14.96 HP), pressure: 13 bar, type of input current: three-phase, warranty duration: 15 months, atlas Copco compressor ( we are official dealer ) mod ga 11 vsd s latest technology S with higher air flow 2260 liters/min list price euro 20600 .serial number itj843510 Gbodpsrfamiofx Ah Hog

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: Gbjdpfx Asq E Irajh Hsg • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SIH30, Year of construction: 2016, operating hours: 4,263 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, motor manufacturer: VW, gearing type: hydrostat, Linde 393 H30D-02 EVO 3B forklift diesel forklift Payload 3000Kg 3to Serial number H2X393G03237 Year of manufacture 2016, only 4263 operating hours (read) Triplex mast - lifting height 4.65m, 3+4 valve Height - only 2.20m NEW-unused Kaup 3.5T466B fork positioner installed!!!! ZVG with integrated side shift, fork length approx. 1.2m 3 LED work lights Length 2.75m, width 1.26m, weight 4790KG VW 4 cylinder diesel Equipment: Full cabin, vehicle: double additional hydraulics, mast: double additional hydraulics, side shift, integrated, full cabin, heating, front axle tires: SE, 27x10-12, rear axle tires: SE, 23x9-10, 2 x LED work lights at the front, 1 x LED reversing light at the rear, higher dust protection, oil bath filter, panoramic mirror, driver's seat with air suspension (synthetic leather), fork tine wear stop, double pedal, central lever and cross lever operation Front tires super elastic 27x10-12 - 85% Rear tires super elastic 23x9-10 - 85% Gbsdpsv E A I Nefx Ah Hjg Forklift has been completely overhauled, cleaned and repainted Only new parts were used Price is net plus VAT The device is fully functional, UVV 02.2026 Very good condition - see pictures Pickup only by appointment in 75053 Gondelsheim 8 ton forklift is available for loading Shipping by freight forwarder possible, please inquire with postcode

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle description Diesel forklift MITSUBISHI FD35N year 2006 lt. Counter 13.347 hours 3,5 tons lifting capacity 2,45 meters headroom 3,70 meters lifting height 42,3 KW Mitsubishi engine - clear view mast - wide fork carriage - twin tires - sideshift - light system - original paint - ready for immediate use Selling price: 10.500,-- net Gsdpfx Aoi Dnqkoh Hebg also favorable delivery possible !!!

Condition: used, Year of construction: 2017, operating hours: 3,123 h, functionality: fully functional, machine/vehicle number: 50614, For sale: used IMA Advantage 400 edge banding machine. This unit features milling aggregates and a profile scraper operated by servomotors, all controlled via computer. Additionally, 3 sets of cleaning fluids are included. The machine has recently undergone maintenance – the glue tank was refurbished, and the feed chain blocks as well as the conveyor belt were replaced. The machine is operational, in constant use, and 100% functional. Gedsww Htljpfx Ah Hebg Current machine hours: 3,123. It has processed 628,910 linear meters. Feel free to contact me for further information or to purchase.