COMPRESSOR

KAESER DSDX 302 SFC

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Ultra-high productivity cutting line comprising: * POLAR 137 X Paper Cutter, year 2005 Bdodpfx Agjyzxlheksi Usable working width: 137 cm. 2 HSS blades, stainless steel air table 80x100 cm with lateral air tables, connected to the Jogger and Discharge System * POLAR RA 4 Jogger, year 2005 with air-removal roller and safety barriers * Automatic discharge system (palletizer) model Polar TR130ER-4 RIGHT, year 2005 * Pile Lifter Polar LW 1000/4, year 2005 Line installed and ready for any test. Technical and aesthetic condition like new. Ready for immediate delivery.

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Bsdpfx Ajyw Rx Esgkedi Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Adjustable profile support arms, facilitating positioning and ensuring operator safety. Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: Bjdpfsyr H Anox Agkjdi The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. Bsdpewittpjfx Agkodi We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Bodpfxsy Iplfs Agkodi 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Plant from spiral freezer. Bdjdpfx Aevvm Afegksi

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Bdsdpfxeim R A Ie Agkei Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Bsdpfx Asfzrgyjgksdi

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Format: 480 x 650 mm Equipment: 1 X Inking Unit Bodpfx Aevfxqgegkodi 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads - max. saw length 5000mm Bedpfx Ageucuhdekodi