Foil-Packing & shrinking equipment

Kallfass

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Credpfx Abexnzlhoxof Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten Crsdjfgyhnspfx Abxof tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m SPECIAL PRICE!!! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW Cjdpjxdxv Njfx Abxerf - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. The machine can be used as a source of spare parts or, with some skill, be restored for further use. Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. Cedszmyguopfx Abxerf If you have any questions or require additional detailed photos, please do not hesitate to contact us.

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Cedpfx Aboi A Ix Hjxsrf

Condition: good (used), Format 500 x 500 mm. Codpfxogt Unkj Abxjrf

Condition: good (used), Format: 500x500 mm Crodpfx Asgt Uplobxof

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 219 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Credeh Ucrbepfx Abxsf Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Belt length: 1250 x 650 mm Welding area: 1000 x 700 mm Credpji D Dz Hjfx Abxsf

Condition: good (used), Format: 500x500 mm Csdpfx Abogt Un Ssxsrf

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Cjdpfx Abowgbxzjxsrf A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Crsdpfszpgh Dex Abxof Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204 Cjdjzpghwopfx Abxorf

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Crsdpfx Abeh Ek Dajxof - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel from Hugo Beck Kallfass Universa 500, year of manufacture 2011. The system is immediately available. The price of the complete system includes the Universa 400. The machine has been technically overhauled and is in very good condition. Technical data: - Length of transverse sealing bar: 500mm Csdpfx Abozn Up Toxjrf - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing bar gap - Film guide plate, available as an option - Control: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing element - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel Hugo Beck Transverse and side sealing have been inspected and overhauled. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine is available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in a complete wrap and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film via a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped with film, transverse sealing is carried out with a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. The remaining strip of film is collected on a film reel. If required, we also offer installation and service for this system or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.