Diesel Forklift

Kalmar DCE120-6

Condition: good (used), machine/vehicle number: 3270, Year of construction: 2012, load capacity: 12,000 kg, lifting height: 4,540 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,450 mm, total width: 2,550 mm, operation weight: 17,820 kg, additional equipment features: Dual tread, Front mud guards, Weight system, Equipment: lighting, Kalmar DCE120-6 from Uniktruck Podpfx Ajul D H Aofhepl

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m Ppodeu Ibu Repfx Afhjl transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: good (used), machine/vehicle number: 3145, Year of construction: 2009, load capacity: 12,000 kg, lifting height: 4,250 mm, mast type: duplex, fork carriage width: 180 mm, fork length: 2,400 mm, total length: 4,730 mm, total width: 2,650 mm, operation weight: 17,660 kg, additional equipment features: Dual tread, Front mud guards, Centralized greasing system, Manual sliding cabin, Equipment: lighting, Kalmar DCE120-6 from Uniktruck Ppjdpfx Afjul Dyiehel

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel forklift Load centre: 600 Psdpfxox H A Tgs Afhepl Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Super elastic Front tyres size: 12.00-20 Rear tyres type: Super elastic Rear tyres size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease purchase and attractive financing options are always available. We are also happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide detailed advice on this DCE120-6. P.S.: Our forklift master workshop specialises in repair, maintenance, refurbishment, and custom build solutions for forklifts from 8 tons and up. We are also happy to offer your vehicle on consignment sale. Clamp attachment Heater, full cabin, air conditioning,

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Pjdpfx Aetrd T Tefhjpl Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, fork carriage width: 2,720 mm, fork length: 2,500 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel forklift Load center: 600 mm Fork width: 300 mm Fork thickness: 95 mm Mast type: Standard Condition: Operational and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCE120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We are also happy to consign your vehicle for sale through us. Sideshift, fork positioner, Podpex H A Taofx Afhepl Fork positioner opening range: 640 / 2600 mm Heater, full cab, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, fork carriage width: 2,720 mm, fork length: 1,800 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel Forklift Load Center: 600 mm Fork Width: 250 mm Fork Thickness: 70 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 12.00-20 Rear Tyres Type: Superelastic Rear Tyres Size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 other heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on attractive terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this DCE120-6. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modification for forklifts from 8 tons upwards. We can also offer your vehicle for consignment sale through our premises. Sideshift, fork positioner, Fork positioner opening range: 640 / 2600 mm Podpfxsxua Dij Afhepl Heater, full cabin, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Pjdpow Eqdwofx Afhspl Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 13,205 h, load capacity: 12,000 kg, lifting height: 5,500 mm, free lift: 2,750 mm, fuel type: diesel, mast type: duplex, construction height: 4,265 mm, fork carriage width: 2,500 mm, fork length: 1,800 mm, empty load weight: 20,840 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,600 mm, Heavy-duty forklift - diesel Load center: 600 Fork width: 250 mm Fork thickness: 75 mm Mast type: Duplex Condition: Ready for operation and fully functional Ppsdpfx Afeu Txgljhjl Technical condition: Very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice regarding this DCE 120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons. We are also happy to put your vehicle on consignment sale at our premises. Sideshift, fork positioner, heater, full cabin, full free lift,

Condition: excellent (used), Year of construction: 2007, Drive type: Diesel Capacity: 12,000 kg Load centre: 600 mm Year of manufacture: 2007 Operating hours: Mast type: Standard Lift height: 5,000 mm Podpfx Ajxfftksfhopl Free lift: yes Overall height: 3,700 mm Fork length: 2,400 mm Length: 6,000 mm Width: 2,480 mm Weight: 15,900 kg Available from: Immediately

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction). Pedpfetp Dhpex Afhjpl  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, machine/vehicle number: 14547, Year of construction: 2010, operating hours: 17,208 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 14547 Equipment Details: Year of Manufacture: 2010 Lift Capacity: 12,000 kg Lift Height: 5,500 mm Operating Hours: 17,208 h Mast Type: Standard Mast Height: 4,280 mm Ppsdpfjtx Urwox Afhel Length/Width/Height: 4,500 / 2,500 / 3,000 mm Operating Weight: 15,950 kg ---- Equipment: * Canopy * 3rd Valve * 4th Valve * Full Cab * Front Work Lights * Rear Work Lights * Dual Tires ---- Further Equipment Information: Without Fork Carriage---- The operating hours are generally based on the readings. We would be happy to offer you the appropriate transport option. Another 250-300 forklifts, attachments, and sweepers are available for immediate delivery. Also available for rent! We'd be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The equipment is sold in the dealer's shop as is, not refurbished. All information is provided without guarantee, errors, and changes excepted.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 8,725 h, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift truck Mast type: Standard Ppodpsw Dkp Rofx Afhsl Condition: Ready for operation and fully functional Technical condition: good Side shifter, fork positioner,

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine. Pedori Slmepfx Afhepl

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,263 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,800 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 600 Ppsdpfxeu Ac I Ue Afhel Mast type: Duplex Technical condition: good Sideshift, fork positioner,