Edge bander
OTT Profimatik M 259-FÜ
Year of construction 2000
400V
Bt9ddsbmfw
22kW
Maschine No. M / 53052
Maggi Edging System 3/50
- machine in stock
- after the technical review
- year of production 2017
- Italian production
TECHNICAL SPECIFICATIONS:
Grvxqip
min./max. thickness of ABS veneer and 0.4 / 3mm melamine
min./max. natural veneer thickness 0.4 / 2 mm
diameter of the veneer support 615 mm
minimum width of the workpiece 90 mm
maximum width of the workpiece 630 mm
minimum length of the workpiece 190 mm
maximum length of the workpiece: 3000 mm
min./max. thickness of processed elements 12...
pre milling unit
Br0f7khp0j
granules gluing unit
pre cutting unit
pressure rolls
precise cutting saws - linear
milling unit with straight tools
milling unit with radius tools
corners copying
profiled cycline
straight cycline
polishers
additional PU gluing unit
Preliminary milling of the plate earning corners cyclone polishers recommend
Ems0mxgx
CATALOG NUMBER HL 001
- new machine,
With pre-milling (diamond heads), radial scraper and polisher.
Operating panel with keyboard, electronic glue temperature settings, heated guide.
High-strength chain feeder - the permanent workpiece feed mechanism consists of a chain and a set of drive rollers that do not leave scratches on the workpiece surface.
Preheating if the hob may be too wet due to bad weather conditions, this preheating helps dry the hob to achieve a good finish.
Pressure roller ...
Suitable for roll edges and solid edges up to 20 mm thick and 60 mm high.
With cap device, flush milling, roll feed with cap,
Radius milling 2-3 mm + scraper, for veneer edges and solid edges glue application can be controlled accordingly.
Machine in working and technically good condition.
Yi3b0diy
HOMAG EDGE BANDING MACHINE KFL 14 with 2 bargstedt .
2 turn stations.
more photos available on request
N7mjf
Biesse Artech Akron 440 edgebander
- after the technical review
- year of production 2010
- maximum equipment
- Italian production
- CE
- control from the Biesse Artech TS 10 control panel
TECHNICAL SPECIFICATIONS:
Brw3azoqo9
max. edge thickness 8 mm
max. 3 mm thick coiled edgeband
feed speed 12-18 m / min
max. edge height 60 mm
min. plate length 140 mm
min. plate width 50 mm
edging warehouse
spray device
pre-milling
glue application
trimming the edges on balls on both sides with the possib...
Type O KDN 520
Air pressure 6 bar
The power supply voltage 400 V 50 Hz
Total power 8,1 kW
B8ocm8pa
Workpiece thickness 8-50 mm
Working height 950 mm
Edge thickness 0,4-8 mm
Sealing side speed 11 m/min
Extraction diameter 1x120/3x60/1x100
Additional gluing unit (for different color granules)
Transport dimensions 4270x900x1750mm
Net weight 1800 kg
Catalog number R014
- edge thickness 0.4-5mm
- element thickness 8-60mm
- minimum element length 120mm
- minimum element width 75mm
- feed speed 9-14m / min
- working pressure 6bar
- voltage 400V
- total power 6,4kW
- dimensions length / width / height 3780/1800 / 1400mm
- weight 1110 kg
ADVANTAGES
- new machine
- warranty
- CE certificate
- professional machine
Net price, calculated at the rate of 4.35 PLN / EUR
(with larger exchange rate fluctuations, the price may change)
Bp23noe9rh
Net p...
Working width minimum: 55 mm with workpiece thickness 22 mm
Boiygbdzk8
100 mm with workpiece thickness 60 mm
Workpiece thickness 12-60 mm
Workpiece overhang 30 mm
Edge material strips 0,4 – 20 mm
Edge material roll 0,3 – 3 mm
Roll diameter max. 830 mm
Transport chain 80 mm wide with rubber pad
Workpiece support Scissors version with roller bearing, max. 1000mm extendable
Feed 18 – 24 m/min
Pre- installation for addition workpiece return system ZHR 05
Units :
Pre-Milling Unit (Vertical joint trim...
Catalog number S0343
- new machine, in stock
- CE certificate
TECHNICAL DATA
1- glue heating
2- preliminary cutters
3- start-end trimming
4- radial milling
5- polishers
6- two scrapers radial and flat - glue
7- earning corners
- workpiece thickness 8-45mm
- minimum workpiece length 100mm
- minimum workpiece width 100mm
- edge thickness 0.4-3.0mm
- feed speed 9.5m / min
- cutting unit - engine power 1x0,27kW
- 2x0.35kW milling aggregate
- milling aggregate 12000 rev / min
- aggregate of making ...
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
