Full-container reach stacker

Kalmar DRG450-65S5

Condition: good (used), machine/vehicle number: 3519, Year of construction: 2023, load capacity: 45,000 kg, lifting height: 15,260 mm, mast type: telescopic, total length: 12,000 mm, total width: 4,250 mm, operation weight: 79,690 kg, additional equipment features: Engine heater, Centralized greasing system, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRG450-65S5XE from Uniktruck Hnjdpfx Agsyuimhofjk

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min Hjdpfx Asd Izmasgfsnk sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: good (used), machine/vehicle number: 3059, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,380 kg, additional equipment features: Front mud guards, Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Hnodpfjyuh Iwex Agfsk

Condition: good (used), machine/vehicle number: 3058, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,740 kg, additional equipment features: Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Hnjdjyuh Iqjpfx Agfek

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Hnjdpfjvvlmcjx Agfok Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), machine/vehicle number: 3057, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,860 kg, additional equipment features: Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Hodeyuh Ikspfx Agfjnk

Condition: good (used), machine/vehicle number: 3056, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,400 mm, total width: 4,150 mm, operation weight: 70,940 kg, additional equipment features: Radio Control, Dual tread, Hydraulic sliding cabin, Front mud guards, 30ft autostop, Rear mud guards, Automatic Greasing System for spreader and inner boom, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Hnedpfxsyuh Idj Agfsk

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking chuck Erowa IST, Hirschmann, 3R Hnodpehtrdyjfx Agfsk Warranty 12 months Transport commissioning on site training

Condition: good (used), machine/vehicle number: 3055, Year of construction: 2016, load capacity: 45,000 kg, lifting height: 15,100 mm, mast type: telescopic, total length: 11,600 mm, total width: 4,190 mm, operation weight: 70,820 kg, additional equipment features: Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, Front mud guards, Rear mud guards, Centralized greasing system, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Hsdpfxoyuh H Ts Agfenk

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 17,846 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, power: 210 kW (285.52 HP), empty load weight: 70,260 kg, drive type: Diesel, Full container reachstacker Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tires type: Air Front tires Size: 18.00-25 Front tires Condition: 0 - 20% Rear tires Type: Air Rear tires Size: 18.00-25 Rear tires Condition: 20 - 40% Hnsdpfx Ageyuz Rlsfek Description: Front work lights, heating, full cab, air conditioning, CE certificate, dual tires, exterior mirrors, LED, seat,

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Hnedpfx Agsv Hxbbjfsk

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 231 kW (314.07 HP), empty load weight: 69,500 kg, drive type: Diesel, Full Container Reachstacker Chassis number: 0 Hjdpfjw A Tw Usx Agfenk Transmission: Dana / HVT R2-851 Condition: New unit Technical condition: New Front tyre type: Pneumatic Rear tyre type: Pneumatic Description:

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 285 kW (387.49 HP), empty load weight: 76,300 kg, drive type: Diesel, Full Container Reachstacker Chassis number: 0 Transmission: Dana TE30510 Hjdsw A Txfopfx Agfonk Condition: New equipment Technical condition: New Front tire type: Pneumatic Rear tire type: Pneumatic Description:

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders Hnodpfsvptmwox Agfok *

Condition: new, functionality: fully functional, machine/vehicle number: B11402508, Year of construction: 2025, operating hours: 12 h, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 265 kW (360.30 HP), empty load weight: 80,300 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B11402508 Transmission: Dana TE30510 Condition: New unit Technical condition: New Hodpfxow Ai D Do Agfenk Front tire type: Pneumatic Rear tire type: Pneumatic Description: