Bench Lathe

KAMI DKM 250V.550

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Hodpfewhd Afox Aflsfk Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate. Hjdpfxeym T Iae Aflofk

Condition: excellent (used), functionality: fully functional, spindle bore: 652 mm, Pinacho L1 lathe, model 225 x 1600mm swing, maximum diameter over bed 450mm, over cross slide 690mm, over compound slide 215mm, spindle bore 52mm, 18 speeds 32-1800 rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories, lathe in good condition. Hfsdezbzzwopfx Aflsk

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, Hjdpfx Afsx Hp Iwslsfk 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Hedpfexz Rfksx Afljfk Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Productivity: 109 boards per hour Under production. Price includes decommissioning and loading on truck. Pictures and videos available upon request. Hodpexanwzsfx Aflsfk For further technical information, please refer to enclosed brochure.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Hfodpfewrm Dtex Aflok >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Hjdpeyyv N Ujfx Aflefk Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: used, mileage: 3,26,000 km, power: 235.36 kW (320.00 HP), first registration: 04/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, emission class: euro5, Equipment: ABS, air conditioning, differential lock, Cat: MAN TGS three-axle, low-loader with ramps, used truck, used lorry, flatbed with ramps, platform with rear inclined overhang and hydraulic ramp. MAN TGS 26.320 6x2: - First registration: 2012; - approx. 326,000 km; - 320 HP engine – Euro 5; - three axles, 6x2 configuration; - intelligent third axle (steers forward and backward); - automatic gearbox; - full air suspension; - low-profile tyres on 1st and 3rd axles 355/50R22.5, 2nd axle 295/60R22.5; - day cab; - GVW: 26,000 kg; - payload: approx. 14,400 kg. Equipment: - differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, driver’s air-suspended seat, sun visor, fog lights, sunroof, central locking, radio. Vehicle transport low-loader body with ramps: - fixed platform/deck approx. 6.65 m long with inclined rear overhang, 40 cm aluminium sideboards, and double-acting hydraulic rear ramps. - Other vehicles available: 2, 3 or 4 axles, equipped with platform and ramps from 6.50 m to 9.40 m or chassis for custom bodywork. The vehicle is available for viewing and test drive at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Area) 37067 Valeggio sul Mincio (Verona) Tel. +39 045 7950955 Please contact us to schedule an appointment in order to organise access to our premises efficiently. Hfjdpfx Afsxzqdgelek For further information, technical clarification, and sale price enquiries, please contact our sales representatives directly on +39 045 7950955. Note: The above vehicle description is indicative only and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications of the vehicle prior to purchase. PSL Autocarri Srl accepts no liability for any mistakes or discrepancies in this description. NOTE: WE WILL ONLY RESPOND TO ENQUIRIES THAT INCLUDE THE REQUESTER'S FULL NAME AND PHONE NUMBER.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 20 mm, turning diameter: 180 mm, turning length: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, overall weight: 52 kg, Technical Specifications Parameter Specification Turning length 350 mm Turning diameter 180 mm Spindle taper MT3 Tailstock taper MT2 Chuck diameter 100 mm Spindle bore 20 mm Metric thread range 0.5–2.5 mm Speed range 50–2500 rpm Motor power 0.55 kW Weight 52 kg Machine dimensions (L × W × H) 810 × 305 × 370 mm Equipment and Free Accessories Set of change gears Chip guard Hfjdpfx Afoyud H Njlek 4-way tool post 3-jaw chuck 100 mm Chuck guard Chuck key Set of Allen keys Set of jaws Dead center Drill chuck Arbor Delivery Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.