Storage elevator

Kardex Remstar SHUTTLE-XP-1000-1850X864

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² Pjdpfxsru A Ato Ab Iegw - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Pgedpfxjt I Di As Ab Iew Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Pgsdpfx Aed Spf Rob Iew Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 3,100 mm, pressing force: 100 t, working length: 3,100 mm, High quality, very clean used Bystronic 8axis cnc pressbrake for sale with hemming table BYSTRONIC XPERT100x3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake Manufactured 2009 – fully serviced and well maintained High Specification: Year of Manufacture /new 2009 Model Xpert 100x3100 Hydraulic tool clamping Podpfx Aetv Ixtob Iegw Back gauge Programmable Guards Capacity 100 Ton Maximum length of bend 3100mm / 3metre Max stroke 215mm Rapid approach 180mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge With hemming table to Dutch fold / produce safety edges and flashings Crowning

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Podpfxsrw A Eio Ab Iogw Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc Pgedsrt Ip Nspfx Ab Iow turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Height 6,000 mm Width 1,630 mm Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Pedjn D A Rrjpfx Ab Iegw Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers Psdpfjxfaf Uex Ab Iegw ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Podpfxowhrfzs Ab Isgw Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT Pjdpsuhcbcefx Ab Iegw - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading