Paint finishing system

KLÖPPER Inspection station

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ncsdpfxsfn Iuds Ag Njn Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable Ncsdpfx Aged Iipxe Njn - Massive, large material support - Automatic cooling

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Nodsia Taujpfx Ag Njcn Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS Ncedpfx Agjwzmcbo Nsn After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall Ncsdeia Ta Hspfx Ag Nen dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Ncedpfx Agjxnpczo Non Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Njdpfx Aew Rpxcog Nscn Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: used, Powder coating line Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X - Side window opening size for painting: X - Drying oven 3x1m - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun Nedpoxgnpkjfx Ag Njcn - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V *Installation dismantled and in storage at our premises. Sold as is.

Condition: good (used), Year of construction: 2022, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: A20221005, We are selling a complete Venjakob painting system, which we used for applying clear coat to sheet metal. The sheets had dimensions of 1,500 mm in width and 6,000 mm in length. The weight per piece was up to 300 kg. The system features six independently programmable spray guns. A drying tunnel is connected. The conveyor belt in the booth is equipped with a cleaning unit. Ncodpfow E E Auex Ag Non

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Ncsdpfxstq E N Ej Ag Nsn Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.