Crane system - 12t

Konecranes

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Njdpfx Aqjy T Ed Ievelb Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Nledpfjy T Eb Tjx Aqveb Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: used, Electric chain hoist, crane, hoisting unit KONECRANES type XN 20 1608 B2 Njdew Nklnspfx Aqvslb Serial no.: 1016304318 Year of manufacture: 2010 Lifting capacity: 1600 kg Hook travel: 9 metres Main lifting speed: approx. 8 m/min Fine lifting speed: approx. 2 m/min Chain size: 11.3 x 31 DAT Main hoist motor power: 3.5 kW Fine hoist motor power: 0.86 kW Power supply: 400 V, 50 Hz - 1 load strand

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 13,049 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 36,400 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,300 mm, Diesel forklift Load center: 1200 mm Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 14.00-24 Rear tires type: Superelastic Rear tires size: 14.00-24 Description: In addition to this SMV model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing on favorable terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this SL20-1200A. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Side shifter, fork positioner, Heater, full cabin, Njdpfx Aey Sixasqvslb

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,876 h, load capacity: 16,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,395 mm, power: 147 kW (199.86 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Nlodpey Scxmsfx Aqveb Condition: Ready for use and fully functional Technical condition: good Front tyre type: pneumatic Rear tyre type: pneumatic Description: Affordable delivery possible Europe-wide!!! Sideshift, fork positioner, Leveling forks 3rd valve, 4th valve, rear working light, front working light, heater, road homologation (STVZO), full cab,

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Not included in the sale: bridge, remote control, coil hook. Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Nledpfx Aey Iv D Uoqvob Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: good (used), functionality: unexamined, total height: 6,500 mm, total length: 12,300 mm, load capacity: 8,000 kg, FOR SALE: KONE Industrial Overhead Crane (8,000 kg / 8 t) Professional-grade overhead bridge crane from Finnish manufacturer KONE. The crane is dismantled and ready for transport. Excellent choice for industrial halls, machine shops, or heavy-duty maintenance applications. Technical Specifications: Brand: KONE Lifting Capacity: 8,000 kg (8 Tons) Year of Manufacture: 1983 Crane No: K 8461 Span: 12.3 meters Lifting Height: 6.3 meters Power Supply: 3N ~ 50Hz, 380 V Speeds: Main Hoist: 5 / 1.6 m/min Trolley Travel: 24 / 8 m/min Bridge Travel: 32 / 10 m/min Maintenance & Condition: Wire Ropes: Replaced on 21.02.2011 (Serviced by Konecranes). Rope type 6X36-FC, 14 mm diameter, 39 m length. Nodpfxey Ix Eno Aqvelb Condition: Used in a professional environment with a regular maintenance log. Sold as-is. Included: Bridge beam, trolley, control cabinet, and the lifting accessories (magnets/grippers) shown in the photos.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: JC9093, total height: 3,300 mm, total length: 38,000 mm, total width: 1,15,300 mm, load capacity: 3,200 kg, We are offering this used Konecranes CXTD 3.2 t x 11.53 m double girder overhead crane with hoist trolley, year of manufacture 2015. Manufacturer: Konecranes Model: CXTD 3.2 t x 11.53 m Year of manufacture: 2015 Lifting capacity: 3.2 t Span: 11.53 m Type: double girder overhead crane with hoist trolley Nljdpfjyxz S Eex Aqvob Dismantling and collection to be handled by the buyer If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Nsdpoykbimjfx Aqvslb Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: G00756, overall weight: 17,640 kg, total length: 1,02,000 mm, total width: 22,500 mm, load capacity: 25,000 kg, main lifting speed: 4,000 mm/min, fine lifting speed: 11 mm/s, working height: 7,601 mm, travel speed (max.): 40,000 mm/min, Equipment: documentation/manual, THE OFFER INCLUDES A GANTRY CRANE WITH TWO HOISTS 2x25t, REMOTE CONTROL, RUNWAY WITH POWER RAIL, LENGTH 102 METERS!!!! Double-girder overhead crane 25T+25T Span between runway rails: 22.5 m Lifting height: 7.6 m Two lifting speeds: main – 4 m/min, fine – 0.67 m/min Njdpjy Egw Hsfx Aqvelb Crane bridge weight (without hoists): 14 t (two sections, 7 t each) The crane’s runway is included in this offer! This is a truly fantastic opportunity. First come, first served! Hoist weight: 2 x 1,870 kg Crane travel speed (along the hall): 40 m/min Hoist travel speed (across the hall): 20 m/min Hoist duty classification: FEM M5 (2m) Crane duty classification: FEM M5 (2m) Overall crane mechanism duty group: H2B3 These classification groups indicate the machine is suitable for heavy and medium-heavy industrial operation—up to 8 hours per day, close to full lifting capacity. Year of manufacture: 2010, the crane is in excellent technical condition. More information is available in the videos. Dismantling is the responsibility of the buyer; I offer my assistance. Dismantling is provisionally planned for the second half of May 2026. The cost of renting the necessary loader for dismantling is approx. €1,500 for 5 days. With two additional people, the equipment can be disassembled and ready for loading in 4 days. I also have specialist transport available for moving the crane to the new owner. The offer includes the complete crane system: two 25T hoists, radio remote control, and 102 m of crane runway. Please watch the video and find the playlist on YouTube—there are 4 videos in total.