Industrial robot

KUKA KR 30-3

Condition: good (used), Industrial robots Manufacturer: Kuka Type: KR30-3, KR30-3 F, KR30L16-2 Type: KR60HA, KR60L30HA All types with KRC4 controller Kuka KR30-3 KRC4 Year of manufacture 2014-2017 = several in stock Kuka KR30-3 Foundry KRC4 Year of manufacture 2018 Kuka KR30L16-2 KRC4 Year of manufacture 2017 = several in stock Kuka KR60HA KRC4 Year of manufacture 2014 Kuka KR60HA KRC4 Year of manufacture 2018-2019 = several in stock Nwsdpfjtui D Tex Af Rsi Kuka KR60L30HA KRC4 Year of manufacture 2017 = several in stock 22726

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic Nodpfou Agh Ssx Af Rowi 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2016, Industrial robot Manufacturer: Kuka Type: KR30-3 Year of manufacture: 2016 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 controller Weight: 150 kg Software version V8.3.40 Interface X11 Nwedpfxsq Dz H Te Af Rei Kuka touch panel Kuka connecting cables 22726

Condition: excellent (used), Year of construction: 2011, KUKA KR 30-3 Robotic Welding Cell + Positioner + Fronius System Robot: KUKA KR 30-3 Controller: KRC2 Robot year of manufacture: 2011 Cell year of manufacture: 2011 2 robots Nwedpfey Ia S Njx Af Rji CMT welding power sources: 2 Welding power source manufacturer: Fronius Type: Trans Synergic 4000 Wire feeder: VR7000CMT Remote control: RCU 5000i 2 torch cleaning stations Rotary table 2 riveting stations Riveting station manufacturer: Böllhoff Microprocessor control: Proface TIG welding unit Manufacturer: Rehm Type: Tiger 170 DC Rotary table for assembly Storage racks Storage platforms

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed Nedpfx Afstkt Tpe Rswi 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: excellent (used), Year of construction: 2017, Industrial robot KUKA KR60 L30-3 Year of production: 2017 Nodpfx Aeu U D Evef Rjwi Payload: 30 kg Reach: 2429 mm Control: KUKA KRC4 2 pcs. available

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KUKA KR 60L30/2 robot, complete with ZH 3 Year of manufacture: 2003 Load capacity: 30 kg Reach: approx. 2429 mm Controller: KRC2 KUKA central hand ZH3 installed Njdpfozmtu Sex Af Rowi Used item – shows normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Njdpfx Afjyh A Iio Rowi Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: Nwjdpfsziciwex Af Rsi The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: excellent (used), Kuka Robot Here, we offer a Kuka robot for sale. (As new/unused) Kuka robot KR 60L30-3 Arm length: 1220 mm Number of axes: 6 Weight: 665 kg Axis 1 (A1) ± 150˚: 128˚/s Axis 2 (A2) +75˚/-105˚: 102˚/s Axis 3 (A3) +158˚/-120˚: 128˚/s Axis 4 (A4) ±350˚: 260˚/s Axis 5 (A5) ±119˚: 245˚/s Axis 6 (A6) ±350˚: 322˚/s With sealed software Rated payload: 30 kg Nedjzd Uc Eopfx Af Rewi Controller: KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) We are happy to answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában. Nwjdpoua D U Ijfx Af Rei

Condition: ready for operation (used), Year of construction: 2015, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, number of axes: 6, This 6-axis KUKA KR30-3 robot arm was manufactured in 2015. It features a payload capacity of 30 kg and a reach of 2,033 mm, making it suitable for various applications. With a teach panel and KR C4 controller included, this machine offers flexibility and efficiency. If you are looking to get high-quality automation capabilities, consider the KUKA KR30-3 robot arm we have for sale. Contact us for further details. Nwjdpfx Ajzd Ryaef Roi • 2x units available • Payload Capacity: 30 kg • Reach: 2,033 mm • Weight: 665 kg • Optional, not included: teach panel, KR C4 controller, cable set

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0000121172, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, controller model: KRC2, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 30 kg Reach: 2,033 mm Number of axes: 6 MACHINE DETAILS Nwsdpfxszcnv Dj Af Rei Control model: KRC2 Machine weight: 665 kg EQUIPMENT Robot arm KRC2 control cabinet Operating panel (KCP2) Cabling (except for one cable to the control unit) Dual gripper Profibus communication Note EXW: Dismantling and loading are to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Nodpfx Afstk N E Te Rowi Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 14,036 h, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, controller manufacturer: KUKA, number of axes: 6, This 6-axis KUKA KR30-3 robot arm was manufactured in 2014. It features a payload capacity of 30 kg and a reach of 2033 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the KUKA KR30-3 machine we have for sale. Contact us for further details. • Repeatability: ±0.05 mm • Controller: KRC4-NA Nedpfxszbkqne Af Rewi