Precision lead screw/feedscrew lathe

LEINEN , Primus Typ 140

Condition: good (used), 1 x Drilling - tapping machine Wörner BG 16 with pneumatic feed (drilling by hand also possible) Coolant device Technical data: spindle speeds : 95 - 3.500 rpm (24 steps via pulley 2 via motor) Ffsdpsipyiwsfx Afpsu mounting: MK 2 Drilling capacity in steel: 16 mm Threading in steel: M 8 The machine can be inspected under power.

Condition: good (used), Please read the technical specifications carefully. If the machine is suitable for your investment, we kindly request a complete verification of your identity, including a correct telephone number and email address, prior to submitting an offer. Lead and feed screw lathe Colchester Triumph 2000 Turning length: 750 mm Swing over bed: 390 mm Swing over cross slide: 240 mm Largest swing in the gap: 580 mm Gap length in front of faceplate: 155 mm Fjdpoyb A Uxjfx Afpefu Spindle bore: Ø 54 mm Spindle mount: 6" D1 Camlock Tailstock: MT4 Quill stroke: 155 mm 16 spindle speeds from 25 to 2000 rpm 39 metric thread pitches from 0.2–14 mm 45 Whitworth thread pitches from 2–72 tpi 18 module thread pitches from 0.3–3.5 module 21 diametral pitch threads from 8–44 DP 15 longitudinal feeds from 0.04–1.0 mm/rev 15 cross feeds from 0.02–0.5 mm/rev Dimensions (LxWxH): 2000 x 980 x 1640 mm Weight: 1350 kg The machine and bed are in good condition and run perfectly. Cross slide backlash: 0.2 mm Top slide backlash: 0.4 mm Accessories/Equipment: - Chuck guard - Machine lamp - Multifix B toolpost - Bed stop - 3-jaw chuck D250 mm - Machine feet

Condition: good (used), functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev Fjdpfxev Irh Ds Afpofu - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories

Condition: good (used), Scope as per image. Infinitely variable speed up to 3,000 rpm. Ffjdpsx Ngypofx Afpeu